Pioneer VSX-9110TXV-K operating instructions Remote control, Range of remote control unit on

Page 75

Additional information

12

Symptom

Remedy

When playing Dolby Digital or

• Check that the player is connected using a digital connection.

DTS sources, the receiver’s

• Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 29).

format indicators do not light.

• Check that the player isn’t set up so that Dolby Digital and DTS sources are converted to PCM.

 

• Ensure that if there are several audio tracks on the disc, the Dolby Digital or DTS is selected.

 

 

When playing certain discs, none

• The disc may not contain 5.1/6.1 channel material. Check the disc packaging for more on what audio

of the receiver’s format

tracks are recorded on the disc.

indicators light.

 

 

 

When playing a disc, the

• Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 29).

2 PL II or Neo:6 indicator lights

• If a two channel soundtrack is currently playing (including Dolby Surround encoded), then this is not a

on the receiver.

malfunction. Check the disc packaging for details about the audio tracks available.

 

 

During playback of a Surround

• The source may be Dolby Surround EX / DTS ES software, but it has no flag to indicate it is 6.1

EX or DTS ES source on the SBch

compatible. Set to SBch ON (see Using surround back channel processing on page 29) then switch to the

AUTO setting, the EX and ES

THX Surround EX or Standard EX listening mode (see Listening in surround sound on page 26).

indicators don’t light, or the

 

signal is not properly processed.

 

 

 

During playback of DVD-Audio,

• This will occur when playing DVD-Audio material over the HDMI connection. This is not a malfunction.

the display shows PCM.

 

 

 

Remote control

Symptom

Remedy

Cannot be remote controlled.

• Try replacing the batteries in the remote control (see Loading the batteries on page 7).

 

• Be sure to operate within 23 feet and a 30º angle of the remote sensor on the front panel (see Operating

 

range of remote control unit on page 22).

 

• Check that there are no obstacles between the receiver and the remote control.

 

• Make sure that there is no fluorescent or other strong light shining on to the remote sensor.

 

• Check the connections of the CONTROL IN jack (see Operating other Pioneer components with this unit’s

 

sensor on page 70).

 

 

Other components can't be

• If the battery ran down, the preset codes may have been cleared. Re-enter the preset codes.

operated with the system remote.

• The preset code may be incorrect. Redo the procedure for entering preset codes.

 

 

The SR cable is connected, but

• Reinsert the SR cable, making sure it’s connected to the right jack (see Using this receiver with a Pioneer

the connected components can’t

plasma display on page 55).

be operated with the remote.

• Make sure that there is an analog connection between the units. This is necessary for the SR feature to

 

work.

 

• Check that the other component is made by Pioneer. The SR feature only works with Pioneer equipment.

 

• Check that the IR receiver setting in Multi-Room and IR receiver setup on page 59 is correct.

 

 

HDMI

Symptom

Remedy

The HDMI indicator blinks

• Check all the points below.

continuously.

 

 

 

No picture or sound.

• This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-

 

compatible. If they are not, please connect them using the component, S-video or composite video jacks.

 

• Depending on the connected source component, it’s possible that it will not work with this receiver (even

 

if it is HDCP-compatible). In this case, connect using the component, S-video or composite video jacks

 

between source and receiver.

 

• If the problem still persists when connecting your HDMI component directly to your monitor, please

 

consult the component or monitor manual or contact the manufacturer for support.

 

• To see the on-screen display, you must also connect the receiver and TV with a composite, component,

 

or S-video cable.

 

 

No sound, or sound suddenly

• Check that the HDMI AV setting is set to AMP/THROUGH.

ceases.

• If the component is a DVI device, use a separate connection for the audio.

 

• Check the audio output settings of the source component.

 

 

Noisy or distorted picture.

• If the problem still persists when connecting your HDMI component directly to your monitor, please

 

consult the component or monitor manual or contact the manufacturer for support.

75

En

Page 74 Page 76
Image 75
Page 74 Page 76
Contents VSX-9110TXV-K Information to User Federal Communications Declaration of ConformityModel Number VSX-9110TXV-K Responsible Party Name Keep in a Secure AREA. this is for Your SecurityImportant Safety Instructions Contents Additional information Other SettingsUsing other functions Other connectionsChecking what’s in the box FeaturesBefore you start Before you start ChapterInstalling the receiver Before you start VentilationLoading the batteries Introduction to home theater Automatically setting up for surround sound McaccMinute guide 02 5 minute guide ChapterSpeaker configuration in the OSD Minute guideWait for the test tones to finish then confirm Playing a source Better sound using Phase ControlProblems when using the Auto Mcacc Setup 02 5 minute guideConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment When making cable connectionsAbout the video converter DVD player Connecting your equipment Connecting your TV and DVD playerConnecting a satellite/cable receiver or other set-top box 342DVR, VCR, etc Connecting a DVD/HDD recorder, VCR and other video sourcesUsing the component video jacks Use an optical cable for the connectionUse a three-way component video cable Connecting digital audio sourcesTape deck, etc Connecting analog audio sourcesConnecting a component to the front panel inputs About the WMA9 Pro decoderConnecting the speakers Connecting your equipment Installing your speaker systemBare wire connections Placing the speakersBanana plug connections THX speaker system setup Connecting antennasAC outlet Connecting external antennasPlug the power cord into a power outlet Plugging in the receiverControls and displays Controls and displays ChapterFront panel Controls and displays Operating range of remote control unitControls and displays Display Controls and displays Remote control ReceiverInput Select Shift 6TUNE/ST /ENTERStatus Multi OPEStandard surround sound Listening to your systemListening to your system Chapter Auto playback Listening in surround soundListening to your system Using the Home THX modesUsing the Advanced surround effects THX Games ModeWhile listening to a source, press Mcacc Using Stream DirectSelecting Mcacc presets Listening in stereoUsing the Virtual Surround Back mode Listening to your system Choosing the input signalPress Tone to select the frequency you want to adjust Using Midnight and LoudnessUsing the Sound Retriever Using the tone controlsListening to the radio Using the tunerUsing the tuner Chapter Saving station presetsAbcdefghijklmnopqrstuvwxyz Using the tunerNaming station presets Listening to station presetsAutomatic Mcacc Expert System Setup menuSystem Setup menu Chapter Making receiver settings from the System Setup menuMemory System Setup menuIf necessary, confirm the speaker configuration in the OSD.1 Surround back speaker settingFine Channel Level Manual Mcacc setupStanding Wave Adjust the level of the left channelWhen youre finished, press Return Fine Speaker DistanceAcoustic Calibration EQ Select ‘Standing Wave’ from the Manual Mcacc setup menuSelect ‘EQ Adjust’ from the Manual Mcacc setup menu Select the channels you want and adjust to your likingHow to interpret the graphical output How to use Professional Acoustic Calibration EQEQ OFF Using Professional Acoustic Calibration EQSelect ‘EQ Professional’ then press Enter Select an option and press EnterChecking Mcacc preset data Copying Mcacc preset dataData Management Clearing Mcacc presets Manual speaker setupSpeaker Setting Renaming Mcacc presetsConfirm your selected setup option Select ‘Speaker Setting’ from the Manual SP Setup menuSelect ‘Channel Level’ from the Manual SP Setup menu Select a setup optionBass Peak Level Speaker DistanceCurve THX Audio SettingOther connections Chapter Connecting an iPodConnecting your iPod to the receiver Other connectionsBasic playback controls Using XM RadioConnecting your XM Radio receiver Other connectionsSaving channel presets Using XM HD SurroundListening to XM Radio About Hdmi Other connections Connecting using HdmiUse standard RCA/phono jack cables for the connections Connecting the multichannel analog inputsSecond Zone speaker B setup Selecting the multichannel analog inputsConnect your speakers as shown below Switching the speaker system2nd Zone setting only.1 Bi-amping your front speakersOther connections Bi-wiring your speakers Connecting additional amplifiersLarge Other connections Multi-room listening Using the multi-room controlsBasic multi-room setup Surround Back System multi-room setupPress Control Connecting an IR receiverMulti-room remote controls Use the Master Volume dial to adjust the volumePioneer plasma display Using this receiver with a Pioneer plasma displayDVD player Satellite receiver, etc Using the SR+ mode with a Pioneer plasma displayPioneer plasma DisplayAdvanced Mcacc output using your PC Other connections Connecting a PC for Advanced Mcacc outputInput function default and possible settings Other SettingsOther Settings Chapter Input Setup menuSR+ Setup for Pioneer plasma displays Other SettingsOther Setup menu Multi-Room and IR receiver setupSelect ‘OSD Adjustment’ from the Other Setup menu OSD AdjustmentSelect ‘SR+ Setup’ from the Other Setup menu Select the ‘PDP Volume Control’ setting you wantSetting What it does Options Using other functionsUsing other functions Chapter Setting the AV optionsWatching video and audio sources independently Using other functions Making an audio or a video recordingReducing the level of an analog signal Using the sleep timerChecking your system settings Using other functionsSwitching the speaker impedance Resetting the systemSetting Default Default system settingsControlling the rest of your system Setting the remote to control other componentsSelecting preset codes directly Programming signals from other remote controlsControlling the rest of your system Erasing one of the remote control button settingsResetting the remote control presets Confirming preset codesRenaming input source names Direct function Multi Operation and System OffProgramming a multi-operation or a shutdown sequence From the menu and press Enter Using multi operationsUsing System off Select the button for the command you want to inputFunction Components Controlling the rest of your system Controls for TVsControls for other components Buttons Function ComponentsDecide which component you want to use the remote sensor Operating other Pioneer components with this unit’s sensorAdditional information Chapter TroubleshootingPower Additional informationAdditional information Other audio problemsVideo SettingsProfessional Calibration EQ graphical output DisplayRange of remote control unit on Remote controlSymptom Cause Action IPod messagesXM radio messages Additional information Surround sound formats DolbyWindows Media Audio 9 Professional About THX Auto Surround Listening modes with different input signal formatsStereo 2 channel signal formats Input signal format StandardAuto Multichannel signal formatsSurround Back speakers Cleaning the unit Additional information SpecificationsTo establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Corporation

VSX-9110TXV-K specifications

The Pioneer VSX-9110TXV-K is a high-performance AV receiver designed to cater to the demanding needs of home theater enthusiasts. Combining advanced technology with versatile features, this model stands as a solid choice for anyone looking to enhance their audio-visual experience.

One of the standout features of the VSX-9110TXV-K is its robust power output capability. With 7.1 channels, the receiver delivers a substantial 100 watts per channel, ensuring that movies, music, and games come to life with pristine clarity and impactful sound. The robust amplification not only provides a powerful output but also ensures that every audio detail is captured, from the softest whispers to the loudest explosions.

In terms of connectivity, the VSX-9110TXV-K boasts multiple HDMI inputs, allowing users to connect various devices such as Blu-ray players, gaming consoles, and streaming devices with ease. It supports 4K Ultra HD video pass-through, ensuring compatibility with the latest high-definition sources. The receiver also features advanced audio decoding technologies, including Dolby Atmos and DTS:X, which create an immersive surround sound environment that transports users right into the center of the action.

The receiver also incorporates Pioneer’s proprietary technologies, such as MCACC (Multi-Channel Acoustic Calibration System), which analyzes the acoustics of the room and automatically adjusts the speaker settings for optimal sound. This ensures a balanced listening experience, tailored specifically to the user’s environment.

The intuitive user interface and comprehensive remote control simplify navigation through the receiver's extensive features. With easy access to streaming services and a variety of input options, users can effortlessly switch between different audio and video sources.

Moreover, the VSX-9110TXV-K is equipped with advanced zone control, allowing users to enjoy audio in multiple rooms simultaneously. This feature enhances the versatility of the receiver, making it perfect for entertaining guests or simply enjoying music throughout the home.

In summary, the Pioneer VSX-9110TXV-K blends power, innovation, and user-friendly features, making it a standout choice for creating a captivating home theater experience. With its rich array of capabilities, it caters to both casual viewers and audiophiles alike, ensuring that every audio and visual experience is nothing short of exceptional.
Top Page Image Contents