Roland HP302 Initializing the Memory, Changing the External Memory Setting External Memory Mode

Page 61

Connecting to Other Devices

Initializing the Memory

Here’s how you can completely erase all songs that were saved in internal memory, USB memory (sold separately), or a floppy disk (sold separately).

Once an initialization is performed, all songs that have been saved in memory will be erased. The erased data cannot be recovered, so we recommend that you check the contents of memory before you proceed.

If you’re using new USB memory (sold separately) or floppy disk with the HP305/HP302 for the first time, you’ll need to initialize (format) the USB memory or floppy disk before using it. The HP305/HP302 can’t use USB memory or floppy disk that has not been initialized.

If you want to initialize USB memory or a floppy disk, make the following preparations before you proceed.

•Connect your USB memory to the external memory connector.

•Connect your floppy disk drive to the external memory connector, and insert a disk in the drive.

1.Enter Function mode, choose “FMt.”

fig.aaaa

2.Press the [-] or [+] button to select the memory that you want to initialize.

Setting

Description

 

 

Internal Memory

Internal memory

External Memory

USB memory, Floppy disk

3.Press the [ ] button.

A confirmation message will appear.

fig.aaaa

If you press the [ ] button, you’ll return to the previous screen without initializing.

4.Press the [ ] button.

Initialization will begin.

The entire contents of the selected memory will be erased. Once the memory has been initialized, the following screen will appear.

Caution when Initializing the Memory

•Never turn off the power while “FMt” is shown in the display.

•If the screen indicates “E,” please refer to “Error Messages” (p. 77).

•Initializing the HP305/HP302’s internal memory will not initialize settings other than the contents of internal memory. If you want to return settings other than the contents of internal memory to their factory-set condition, execute the Factory Reset operation (p. 61).

•Don’t disconnect the USB memory until USB memory initialization has been completed.

•While a floppy disk is being initialized, do not eject the disk from the floppy disk drive or disconnect the cable of the disk drive.

Changing the External Memory Setting (External Memory Mode)

In some cases, when USB memory is connected to the external memory connector, it may take longer for data to be loaded, or data may fail to be loaded successfully. If this occurs, you may be able to solve the problem by changing the external memory setting

1.Enter Function mode, choose “UMd.”

fig.aaaa

2.Press the [-] or [+] button to edit the setting.

Setting

Description

 

 

 

 

 

 

 

Mode1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mode2

 

 

 

 

 

 

 

 

 

 

 

3.If you change this setting, turn on the power once again.

This setting is remembered even when the power is turned off.

63

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Important Safety Instructions Use Lessons at homeNow I can play it Contents Appendices Using the Unit Safely Using the Unit Safely Using the Unit Safely Placement Power SupplyMaintenance Maintenance Polished-finish pianosHandling Using USB memory Additional PrecautionsRepairs and Data Handling the Floppy Disk DriveImportant Notes Names of Things and What They Do HP305 Pedal connector Power switchMidi Out/In connectors USB connector+ button Names of Things and What They Do HP302DC In jack DC Inlet Ground terminalGetting Ready to Play Before You PlayUsing the music holders Setting up the Music Rest HP305Raising the music rest Folding down the music restOpening/Closing the Lid Setting up the Music Rest HP302Adjusting the Sound’s Volume Turning the Power On/OffTurning the Power On Turning the Power OffAbout the Adjuster Using the PedalsDamper Pedal right pedal Sostenuto Pedal center pedal Soft Pedal left pedalConnecting the Headphones Using the HeadphonesPlug the headphones into the Phone jack Attaching the Headphone Hook Using the Headphone HookPerforming with Various Sounds PerformingAbout the tones you can select Press the Piano buttonChanging the Metronome’s Tempo Performing with the MetronomeCorrespondence between beat and tempo display Press the Metronome buttonPress the Display button Changing the Metronome’s Time SignatureIndicate Beat Metronome volume range Adjusting the Metronome’s VolumeAdding a Count-in to Synchronize Your Performance Count-in Press the buttonAdding Reverberation to the Sound Reverb Adjusting the Depth of the Reverb EffectWhat are Effects? Press the Reverb buttonPress the Key Touch button to return to selection of tones Adjusting the Keyboard Sensitivity Key TouchIndicate Description Performing with Two Layered Tones Dual Play Tone name Corresponding button How to select tonesAbout the tones Hold down the Piano button and press the Strings buttonPress the Twin Piano button Dividing the Keyboard for Two-person Performance Twin PianoDamper pedal Value Description Hold down the Twin Piano button and press the or + buttonFor the HP305 For the HP302Right-hand Tone Split Point Power-up default FChanging the right-hand tone Changing the Tones of the Left and Right ZonesChanging the left-hand tone Press a tone buttonHow the Split Point is shown Changing the Keyboard’s Split PointDisplay Transposition range Transposing the Keyboard TransposeIt will sound Hold down the Right button for a while Disabling the Buttons Panel LockPlaying Back Songs Listening to SongsFast-forward and rewind Operation ButtonPerformance parts and tracks Playing Parts IndividuallyMuting Practicing the right-hand part by itselfSong volume range Adjusting the Volume of the Song PlaybackPlaying All Songs Consecutively All Songs Play Hold down the Display button and press the buttonChanging the Pitch of the Song Playback Transpose Changing the Song’s TempoRecording Your Keyboard Performance Recording Your PerformanceGetting ready to record Starting/stopping recordingIf the following indication appears Listening to the recorded performanceErasing Your Recorded Performance Getting ready to save Saving Your Recorded PerformancePress the or + button to select the save destination Selecting the save destination for the songPress the Twin Piano button or the Key Touch button Getting ready to delete Deleting a Saved SongDeleting the song Choosing the song to deleteRecording Each Hand Separately Advanced Recording MethodsRecorded performances and the track buttons Track button Recorded performanceAdditional recording Recording and stoppingTo stop recording, press the button When you re-record Getting ready to perform Recording a Performance You Play Along with a SongTrack button Performance part Recording and stopping Basic Operation in Function Mode Various SettingsEntering Function mode Selecting the setting that you want to editPress the or + button to edit the setting Editing a settingButton Function Brilliance Reverb Button FunctionPerforming Settings Sounds SettingsAdjusting the Sound’s Brilliance Brilliance Changing the Pitch of the Tone in Octave Steps Octave ShiftTuning Settings Pedal Settings Piano Sound SettingsChanging How the Pedals Work Center/Left Pedal Function Function DescriptionUsing the Sound of a Specific Part as a Guide Mute Volume Other SettingsPlaying Back at a Fixed Tempo Tempo Mute Restoring the Factory Settings Factory Reset Storing Your Settings Memory BackupConnecting a Media Connecting to Other DevicesInstalling the CD Drive Installing the Floppy Disk DriveIf you change this setting, turn on the power once again Changing the External Memory Setting External Memory ModeInitializing the Memory Enter Function mode, choose FMtSelecting a song Playing Back Songs on External MediaButton operations Order in which memories are selectedMinimizing the Sounds in the Center Center Cancel Adjusting the Volume of an Audio File or Music CDChanging the Tempo of an Audio File or Music CD Changing the Playback Pitch of a Song Playback TransposeDeleting a Song from External Memory Saving Your Recorded Performance on External MemorySaving the Song Selecting the song to deleteTurning Off the Power Connecting to Audio EquipmentHP305 HP302 Turn off the connected speakers Turn off the HP305/HP302 Connecting Speakers to the HP305/HP302 and Outputting SoundsConnecting a Midi Sequencer to the HP305/HP302 Connecting to Midi DevicesWhat’s MIDI? Making the Connection Local On Midi Transmit Channel Settings Midi Transmit ChannelLocal Off Changing the USB Driver Settings USB Driver Connecting a ComputerRoland website Use the or + button to edit the setting Using the V-LINK FunctionSpecifying the V-LINK Transmit Channel Hold down the Reverb button and press Transpose buttonSymptom Cause/Action TroubleshootingNo sound Song does not play correctly TroubleshootingFunctions that cannot be used with audio file playback Can’t record / play backIndication Meaning Error MessagesPiano Tone ListStrings OthersTone List Tone List Song Name Composer Internal Song ListItems Parameters Stored in Memory BackupHP305/HP302 Allows You To Use the Following Music Files Music Files That the HP305/HP302 Can UseTransmitted Midi Implementation ChartRemarks RecognizedHP305/HP302 Digital Piano Keyboard Main SpecificationsSound Generator Conforms to GM2/GS/XGlite RecorderInternal Memory CD/Audio Type 57, 60 IndexLink Transmit Channel 57, 73 Memo Memo Memo Declaration of Conformity For EU Countries Information
Top Page Image Contents