Roland HP302, HP305 Midi Transmit Channel Settings Midi Transmit Channel, Local On, Local Off

Page 69

Connecting to Other Devices

Preventing Doubled Notes When Connected to a Sequencer (Local Control)

When you have a MIDI sequencer connected, set this parameter to Local Off.

Since the Thru function of your sequencer will normally be turned on, notes played on the keyboard or played back by the recorder will be transmitted to the sound generator by the two routes (1) and

(2) shown in the illustration, causing notes

to be sounded in duplicate or to be cut off unnaturally. To prevent this, the setting called “Local Off” is used to disconnect the route in

(1).

fig.aaaa

(1) Local On

 

 

Sequencer

Sound

MIDI

MIDI

IN

OUT

Generator

 

Memory

 

 

 

MIDI

MIDI

 

OUT

IN

(2) Soft Thru On

Each note played is sounded twice

Local On:

The keyboard and recorder are connected to the internal sound generator.

fig.aaaa

Sound is emitted

Sound Generator

Local On

Local Off:

The keyboard and recorder are not connected to the internal sound generator. No sound will be produced by the keyboard when it is played.

fig.aaaa

No sound produced

Sound Generator

Local Off

1.Enter Function mode, choose “L. Ct”(p. 55).

2.Press the [-] or [+] button to switch “On” or “OFF.”

Setting

Description

 

 

 

The Local Control is set to On.

On

The keyboard and recorder are connected to the internal

 

sound generator.

 

 

 

The Local Control is set to Off.

OFF

The keyboard and recorder are not connected to the internal

sound generator. Playing the keyboard or playing back a song

 

 

will not produce sound.

 

 

MIDI Transmit Channel Settings (MIDI Transmit Channel)

This setting specifies the MIDI channel on which the HP305/HP302 will transmit. MIDI uses sixteen “MIDI channels,” which are numbered 1 through 16. By connecting MIDI devices and specifying the appropriate MIDI channel for each device, you can play or select sounds on those devices.

The HP305/HP302 will receive all sixteen channels (1–16).

1.Enter Function mode, choose “Ch” (p. 55).

2.Press the [-] or [+] button to edit the setting.

Setting (Channel)

OFF, 1–16

When set to “OFF,” none of the data describing what you play on the keyboard will be transmitted.

Sending Recorded Performance Data to a MIDI Device (Composer MIDI Out)

When Composer MIDI Out is “On,” you can send performance data recorded with the HP305/HP302 to a connected MIDI device or computer.

1.Enter Function mode, choose “Out”(p. 55).

2.Press the [-] or [+] button to switch “On” or “OFF.”

Setting

Description

 

 

On

Performance data is transmitted.

 

 

OFF

Performance data is not transmitted.

 

 

71

Page 68 Page 70
Image 69
Page 68 Page 70
Contents Important Safety Instructions Use Lessons at homeNow I can play it Contents Appendices Using the Unit Safely Using the Unit Safely Using the Unit Safely Placement Power SupplyMaintenance Maintenance Polished-finish pianosHandling Using USB memory Additional PrecautionsRepairs and Data Handling the Floppy Disk DriveImportant Notes Names of Things and What They Do HP305 Pedal connector Power switchMidi Out/In connectors USB connector+ button Names of Things and What They Do HP302DC In jack DC Inlet Ground terminalGetting Ready to Play Before You PlayUsing the music holders Setting up the Music Rest HP305Raising the music rest Folding down the music restOpening/Closing the Lid Setting up the Music Rest HP302Adjusting the Sound’s Volume Turning the Power On/OffTurning the Power On Turning the Power OffAbout the Adjuster Using the PedalsDamper Pedal right pedal Sostenuto Pedal center pedal Soft Pedal left pedalUsing the Headphones Connecting the HeadphonesPlug the headphones into the Phone jack Attaching the Headphone Hook Using the Headphone HookPerforming with Various Sounds PerformingAbout the tones you can select Press the Piano buttonChanging the Metronome’s Tempo Performing with the MetronomeCorrespondence between beat and tempo display Press the Metronome buttonChanging the Metronome’s Time Signature Press the Display buttonIndicate Beat Metronome volume range Adjusting the Metronome’s VolumeAdding a Count-in to Synchronize Your Performance Count-in Press the buttonAdding Reverberation to the Sound Reverb Adjusting the Depth of the Reverb EffectWhat are Effects? Press the Reverb buttonAdjusting the Keyboard Sensitivity Key Touch Press the Key Touch button to return to selection of tonesIndicate Description Performing with Two Layered Tones Dual Play Tone name Corresponding button How to select tonesAbout the tones Hold down the Piano button and press the Strings buttonDividing the Keyboard for Two-person Performance Twin Piano Press the Twin Piano buttonDamper pedal Value Description Hold down the Twin Piano button and press the or + buttonFor the HP305 For the HP302Right-hand Tone Split Point Power-up default FChanging the right-hand tone Changing the Tones of the Left and Right ZonesChanging the left-hand tone Press a tone buttonChanging the Keyboard’s Split Point How the Split Point is shownDisplay Transposing the Keyboard Transpose Transposition rangeIt will sound Hold down the Right button for a while Disabling the Buttons Panel LockPlaying Back Songs Listening to SongsFast-forward and rewind Operation ButtonPerformance parts and tracks Playing Parts IndividuallyMuting Practicing the right-hand part by itselfSong volume range Adjusting the Volume of the Song PlaybackPlaying All Songs Consecutively All Songs Play Hold down the Display button and press the buttonChanging the Pitch of the Song Playback Transpose Changing the Song’s TempoRecording Your Keyboard Performance Recording Your PerformanceGetting ready to record Starting/stopping recordingIf the following indication appears Listening to the recorded performanceErasing Your Recorded Performance Getting ready to save Saving Your Recorded PerformanceSelecting the save destination for the song Press the or + button to select the save destinationPress the Twin Piano button or the Key Touch button Getting ready to delete Deleting a Saved SongDeleting the song Choosing the song to deleteRecording Each Hand Separately Advanced Recording MethodsRecorded performances and the track buttons Track button Recorded performanceRecording and stopping Additional recordingTo stop recording, press the button When you re-record Recording a Performance You Play Along with a Song Getting ready to performTrack button Performance part Recording and stopping Basic Operation in Function Mode Various SettingsEntering Function mode Selecting the setting that you want to editPress the or + button to edit the setting Editing a settingButton Function Brilliance Reverb Button FunctionPerforming Settings Sounds SettingsAdjusting the Sound’s Brilliance Brilliance Changing the Pitch of the Tone in Octave Steps Octave ShiftTuning Settings Pedal Settings Piano Sound SettingsChanging How the Pedals Work Center/Left Pedal Function Function DescriptionOther Settings Using the Sound of a Specific Part as a Guide Mute VolumePlaying Back at a Fixed Tempo Tempo Mute Restoring the Factory Settings Factory Reset Storing Your Settings Memory BackupConnecting a Media Connecting to Other DevicesInstalling the CD Drive Installing the Floppy Disk DriveIf you change this setting, turn on the power once again Changing the External Memory Setting External Memory ModeInitializing the Memory Enter Function mode, choose FMtSelecting a song Playing Back Songs on External MediaButton operations Order in which memories are selectedMinimizing the Sounds in the Center Center Cancel Adjusting the Volume of an Audio File or Music CDChanging the Tempo of an Audio File or Music CD Changing the Playback Pitch of a Song Playback TransposeDeleting a Song from External Memory Saving Your Recorded Performance on External MemorySaving the Song Selecting the song to deleteConnecting to Audio Equipment Turning Off the PowerHP305 HP302 Turn off the connected speakers Turn off the HP305/HP302 Connecting Speakers to the HP305/HP302 and Outputting SoundsConnecting to Midi Devices Connecting a Midi Sequencer to the HP305/HP302What’s MIDI? Making the Connection Midi Transmit Channel Settings Midi Transmit Channel Local OnLocal Off Connecting a Computer Changing the USB Driver Settings USB DriverRoland website Use the or + button to edit the setting Using the V-LINK FunctionSpecifying the V-LINK Transmit Channel Hold down the Reverb button and press Transpose buttonTroubleshooting Symptom Cause/ActionNo sound Song does not play correctly TroubleshootingFunctions that cannot be used with audio file playback Can’t record / play backIndication Meaning Error MessagesPiano Tone ListStrings OthersTone List Tone List Song Name Composer Internal Song ListItems Parameters Stored in Memory BackupHP305/HP302 Allows You To Use the Following Music Files Music Files That the HP305/HP302 Can UseTransmitted Midi Implementation ChartRemarks RecognizedHP305/HP302 Digital Piano Keyboard Main SpecificationsSound Generator Conforms to GM2/GS/XGlite RecorderInternal Memory CD/Audio Type 57, 60 IndexLink Transmit Channel 57, 73 Memo Memo Memo Declaration of Conformity For EU Countries Information
Top Page Image Contents