Connecting to Audio Equipment
When you connect the HP 237R to audio equipment, you can play the sounds from the HP 237R through the speakers on the audio equipment or record your performances on a tape recorder or other recording device.
■Connectors
| Input |
| Output |
R | L(Mono) | R | L(Mono) |
| Stereo |
| Stereo |
Output Jacks
You can connect audio equipment using audio cables (sold separately) and play the sounds from the HP 237R through the speakers on the connected equipment or record your performances on a tape recorder or other recording device. If the output of the connected device is monaural, you must use the L (Mono) jack.
Input Jacks
You can connect another sound source, such as audio equipment or an electronic instrument using audio cables (sold separately) and play the sounds from the connected device through the speakers on the HP 237R.
If the output of the connected device is monaural, you must use the L (Mono) jack.
■Making the Connections
*To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
*Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction.
❍Playing Sounds from the HP 237R Through the Speakers on Audio Equipment or Recording
Your Performances on a Recording Device
fig.59
Input R/L
(Line In, Aux In)
HP 237R |
|
|
| MIDI | Pedal |
| Out | In |
Input | Output |
|
R L(Mono) | R L(Mono) |
|
Stereo | Stereo |
|
1.Turn the volume all the way down on the HP 237R and on the device you’re about to connect.
2.Turn off the power to the HP 237R and other connected equipment.
3.Use audio cables (sold separately) to make the connection.
4.Turn on the power of the HP 237R.
5.Switch on the connected device.
6.Adjust the volume level on the HP 237R and the connected device.
When Recording HP 237R Performances on a Recording
Device
7.Start recording with the connected device.
8.Play the keyboard.
9.When the performance ends, stop recording on the connected equipment.
❍Playing Audio Equipment Sounds Through the
Speakers on the HP 237R
fig.60
Output R/L
(Line Out, Aux Out)
HP 237R
MIDIPedal
OutIn
| Input |
| Output |
R | L(Mono) | R | L(Mono) |
| Stereo |
| Stereo |
1.Turn the volume all the way down on the HP 237R and on the device you’re about to connect.
2.Turn off the power to the HP 237R and other connected equipment.
3.Use audio cables (sold separately) to make the connection.
4.Turn on the power to the connected equipment.
5.Turn on the HP 237R.
6.Adjust the volume level on the HP 237R and the connected device.
❍Turning the Power Off After Use
After use, follow the steps below to switch off the power.
1.Turn the volume all the way down on the HP 237R and on the device you’re about to connect.
2.Turn off the power to the HP 237R.
3.Turn off the connected equipment.
36