Roland PC-70 Changing the Velocity Sensitivity Velocity, Press the F#3 black key Velocity

Page 18

Changing the Velocity Sensitivity: Velocity

Whenever a key is pressed on the instrument, the value for velocity will be transmitted along with the note information. The following setting allows you to choose the sensitivity of the response to velocity (range of possible change).

fig.VeloCurv.e

Slider position: minimum

Velocity value

Strength of key touch

Slider position: center

Velocity value

Strength of key touch

Slider position: maximum

Velocity value

Strength of key touch

fig.velocity.e

Velocity

[Procedure]

1.Set the MIDI channel to match that of the Part (sound module) to be controlled.

2.Press MIDI/SELECT [3] (LED will show “SEL”).

3.Press the F#3 black key (VELOCITY) [8].

4.Press MIDI/SELECT [3] again to confirm your selection. Move the DATA ENTRY slider to select the minimum value, thus setting the desired range for velocity. With the slider at its maximum, velocity values within the entire 1–127 range can be generated.

Image 18

Contents Page Avis Page Page Table of Contents Maintenance Power SupplyPlacement Additional PrecautionsAbout the PC-70 About the Sounds Contained in a GS Sound ModuleSuperb Playability and Expressiveness Complete Range of Control FeaturesAbout the Drum Sets Provided by a GS Sound Module Makes Desk Top Music DTM More EnjoyableAftertouch Velocity Chorus Level Reverb Level Panpot Volume Panel DescriptionsPower Setting Up the PC-70How to Connect the AC Adaptor Desk Top Music Setup Procedure Powering UpSetting the Midi Channel Midi Transmit Channel Midi ChannelPress Enter Press the F#4 black key CC 32 Changing Sounds in a GS Sound ModulePress the G#4 black key CC 00 Press Enter Press the A#4 black key Program Change PCChanging Drum Sets in a GS Sound Module ExamplePress Enter Press the A#4 black key PC Modifying the Sound of Notes Modulation CC Features Useful When PlayingApplying Pitch Changes to Notes Pitch Bend Adding a Sustain Effect to Notes Hold 1 CCEx. Shift the Sound Range Down One Octave Octave Down Changing OctavesEx. Shift the Sound Range Up One Octave Octave UP Return to the Normal Sound Range StandardControlling a Sound Module with the Data Entry Slider AftertouchPress the F3 white key After Touch Changing the Velocity Sensitivity Velocity VelocityPress the F#3 black key Velocity Chorus Depth Changing the Chorus Depth Chorus Send Level CCChanging the Reverb Depth Reverb Send Level CC Reverb DepthPress the D#4 black key Volume Setting the Sound Location Panpot CCChanging the Volume Volume CC Press the C#4 black key PanpotLSB for controllers Select CC EnterPress the F4 white key CC Select Troubleshooting PC-70 cannot transmit GS Reset messagesMidi Implementation Chart FunctionOmni ON, Poly Specifications Information 02343089 ’00-6-C4-11SK