Roland PC-70 owner manual Setting the Sound Location Panpot CC, Changing the Volume Volume CC

Page 20

Setting the Sound Location: Panpot (CC 10)

When the module is connected so its sounds are produced in stereo, this parameter determines the stereo placement (L/R) of the individual sounds produced. For the Drum Part (ch. 10), it alters in a relative manner the overall Panpot setting for percussive instruments (the overall orientation of the Drum Part on a GS module).

fig.pan.e

Pan

[Procedure]

1.Set the MIDI transmit channel to match that of the desired Part.

2.Press MIDI/SELECT [3] (LED will show “SEL”).

3.Press the C#4 black key (PANPOT) [11].

4.Press MIDI/SELECT [3] again to confirm your selection. Now you can use the DATA ENTRY slider to set the value to be transmitted for the Panpot. With the slider at the center, the sound will be oriented in the center. When pulled all the way forward, the sound will be heard from the extreme left. When pushed completely back, the sound will come from the right.

Changing the Volume: Volume (CC 07)

This function allows you to adjust the volume level for each Part.

fig.volume.e

Volume

[Procedure]

1.Set the MIDI transmit channel to match that of the desired Part.

2.Press MIDI/SELECT [3] (LED will show “SEL”).

3.Press the D#4 black key (VOLUME) [12].

4.Press MIDI/SELECT [3] again to confirm your selection. Now you can use the DATA ENTRY slider to set the value that will be transmitted for the Volume.

20

Image 20

Contents Page Avis Page Page Table of Contents Power Supply PlacementMaintenance Additional PrecautionsAbout the PC-70 About the Sounds Contained in a GS Sound ModuleComplete Range of Control Features About the Drum Sets Provided by a GS Sound ModuleSuperb Playability and Expressiveness Makes Desk Top Music DTM More EnjoyableAftertouch Velocity Chorus Level Reverb Level Panpot Volume Panel DescriptionsHow to Connect the AC Adaptor PowerSetting Up the PC-70 Desk Top Music Setup Powering Up Setting the Midi Channel Midi Transmit ChannelProcedure Midi ChannelChanging Sounds in a GS Sound Module Press the G#4 black key CC 00Press Enter Press the F#4 black key CC 32 Press Enter Press the A#4 black key Program Change PCPress Enter Press the A#4 black key PC Changing Drum Sets in a GS Sound ModuleExample Features Useful When Playing Applying Pitch Changes to Notes Pitch BendModifying the Sound of Notes Modulation CC Adding a Sustain Effect to Notes Hold 1 CCChanging Octaves Ex. Shift the Sound Range Up One Octave Octave UPEx. Shift the Sound Range Down One Octave Octave Down Return to the Normal Sound Range StandardPress the F3 white key After Touch Controlling a Sound Module with the Data Entry SliderAftertouch Press the F#3 black key Velocity Changing the Velocity Sensitivity VelocityVelocity Changing the Chorus Depth Chorus Send Level CC Changing the Reverb Depth Reverb Send Level CCChorus Depth Reverb DepthSetting the Sound Location Panpot CC Changing the Volume Volume CCPress the D#4 black key Volume Press the C#4 black key PanpotLSB for controllers Press the F4 white key CC Select Select CCEnter Troubleshooting PC-70 cannot transmit GS Reset messagesMidi Implementation Chart FunctionOmni ON, Poly Specifications Information 02343089 ’00-6-C4-11SK