Roland PC-70 owner manual Powering Up, Setting the Midi Channel Midi Transmit Channel, Procedure

Page 12

Powering Up

*Once the connections have been completed (p. 10), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

Power to the various devices should be turned on in the appropriate order. First, turn on the units from which MIDI messages will originate (computer, PC-70). Next, turn on the sound module, then the audio reproduction equipment. This unit’s power switch [23] is located on its rear panel.

Power off your system in the reverse order.

*This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

Setting the MIDI Channel (MIDI Transmit Channel)

To control the sound module, set the MIDI channel the PC-70 will use to transmit on to the same channel the module is using to receive on. If the sound module is multitimbral, set the channel on the PC-70 so it matches the MIDI channel of the Part in the module that you wish to control.

fig.MidiCh.e

MIDI Channel

[Procedure]

1.Press MIDI/SELECT [3] (LED will show “SEL”).

2.Select the MIDI channel by pressing one of the 16 keys in the MIDI channel section [6].

3.Press MIDI/SELECT [3] again to confirm your selection.

12

Image 12

Contents Page Avis Page Page Table of Contents Power Supply PlacementMaintenance Additional PrecautionsAbout the PC-70 About the Sounds Contained in a GS Sound ModuleComplete Range of Control Features About the Drum Sets Provided by a GS Sound ModuleSuperb Playability and Expressiveness Makes Desk Top Music DTM More EnjoyableAftertouch Velocity Chorus Level Reverb Level Panpot Volume Panel DescriptionsPower Setting Up the PC-70How to Connect the AC Adaptor Desk Top Music Setup Powering Up Setting the Midi Channel Midi Transmit ChannelProcedure Midi ChannelChanging Sounds in a GS Sound Module Press the G#4 black key CC 00Press Enter Press the F#4 black key CC 32 Press Enter Press the A#4 black key Program Change PCChanging Drum Sets in a GS Sound Module ExamplePress Enter Press the A#4 black key PC Features Useful When Playing Applying Pitch Changes to Notes Pitch BendModifying the Sound of Notes Modulation CC Adding a Sustain Effect to Notes Hold 1 CCChanging Octaves Ex. Shift the Sound Range Up One Octave Octave UPEx. Shift the Sound Range Down One Octave Octave Down Return to the Normal Sound Range StandardControlling a Sound Module with the Data Entry Slider AftertouchPress the F3 white key After Touch Changing the Velocity Sensitivity Velocity VelocityPress the F#3 black key Velocity Changing the Chorus Depth Chorus Send Level CC Changing the Reverb Depth Reverb Send Level CCChorus Depth Reverb DepthSetting the Sound Location Panpot CC Changing the Volume Volume CCPress the D#4 black key Volume Press the C#4 black key PanpotLSB for controllers Select CC EnterPress the F4 white key CC Select Troubleshooting PC-70 cannot transmit GS Reset messagesMidi Implementation Chart FunctionOmni ON, Poly Specifications Information 02343089 ’00-6-C4-11SK