| Prestige 2000W Quick Start Guide | |
|
| |
PROBLEM | CORRECTIVE ACTION | |
The signal icon | The signal quality is low or the Prestige cannot find the AP. | |
( ) is blinking | Connect to another AP. | |
| ||
| Move your Prestige closer to the AP. | |
| There may be too much radio interference (for example a microwave or another AP using the | |
| same channel) around your wireless network. Relocate or reduce the radio interference. | |
|
| |
“Net Fail! | The Prestige failed to obtain an IP address from a DHCP server. | |
(DHCP)” | Make sure your wireless LAN settings are correct. | |
displays. | ||
Make sure the DHCP server is operating properly. | ||
| ||
| Restart the Prestige. | |
|
| |
“Net Fail! | The Prestige failed to obtain an IP address from the ISP. | |
(PPPoE)” | Make sure your PPPoE settings are correct. | |
displays. | ||
Restart the Prestige. | ||
| ||
|
| |
“Not Registered” | The Prestige failed to register with the SIP proxy server. | |
displays | It is still possible to place a direct IP to IP call without the SIP proxy server. You must create | |
| and use a phonebook entry (see Section 4 on page 17). | |
| Check your SIP settings. | |
| Contact your voice service provider. | |
|
|
Procedure to View a Product’s Certification(s)
1 Go to www.zyxel.com.
2Select your product from the
3Select the certification you wish to view from this page.
21
VoIPon Solutions www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0) 1245 600560
