Roland MP-500 Connecting to Midi Devices, Making the Connections, About the Midi Connectors

Page 31

Connecting to MIDI Devices

Read this chapter if you wish to connect the MP-500 to an external MIDI device.

If the MP-500 is connected to a MIDI sequencer, such as one from the MT series, a performance recorded on the MP-500 can be transmitted to the MIDI sequencer. It is also possible to record the performance directly on the MIDI sequencer.

The recorded performance can be saved on the MIDI sequencer.

When the MP-500 is connected to an MT series sequencer, the rich variety of sounds built into the MT series sequencer can be played from the keyboard of the MP-500.

About MIDI

MIDI, short for “Musical Instrument Digital Interface,” was developed as a standard for the exchange of performance data between electronic instruments and computers.

The MP-500 is equipped with MIDI connectors to allow such exchange of performance data with external equipment and devices. Connecting the keyboard to other devices with these jacks provides you with an even greater variety of ways to use your keyboard.

Making the Connections

NOTE

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

1.Turn the volume down completely on all equipment.

2.Turn off the MP-500 and any other devices to be connected.

3.Use the optional MIDI cable to connect the MIDI connector on the external MIDI device

to the MIDI connector on the MP-500.

Take a look at the connection examples.

4.Turn on the power to all equipment.

5.Adjust the volume.

6.You should also make the following

settings as needed.

For details on making MIDI-related settings for the

MP-500, refer to p. 32 through p. 35.

About the MIDI Connectors

fig.8-01.e

MIDI

OutIn

MIDI connectors on the rear panel

MIDI In Connector

Use a MIDI cable (sold separately) to connect from here to the MIDI Out connector on the external MIDI device.

MIDI messages sent from connected external equipment will be received here. As a result, the MP-500 will produce sound, change tones, or perform other operations.

MIDI Out Connector

Use a MIDI cable (sold separately) to connect from here to the MIDI In connector on the external MIDI device. Performance data detailing what has been played on the keyboard, and other data, such as that generated when a pedal is depressed, is sent out from here to external MIDI devices.

Connection Examples: Connecting to a sequencer (The Roland MT Series)

fig.8-02.e

MT Series

Out MIDI In

MP-500

MIDIPedal

OutIn

* The MT-90s has no MIDI Out connector.

Connection Examples: Connecting to a MIDI sound module

fig.8-03.e

Sound Module

MIDI

THRU OUT IN

MP-500

MIDIPedal

OutIn

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Try Recording Your Performance Connecting to Midi DevicesListening to the Demo Songs Playing the KeyboardPage Important Safety Instructions Use only the attached power-supply cord Protect the unit from strong impact. Do not drop it Additional Precautions Power SupplyPlacement MaintenanceCaptures the brilliant resonance Main Features of the MP-500Reproduces the extended high-frequency response Button Descriptions Metronome On/Off Button Metronome Tempo SliderMetronome Beat Slider Metronome Sound ButtonAbout the Pedals Connecting the Power CordGetting Started Opening and Closing the LidTurning off the power Adjusting the VolumeSetting the Music Stand Turning on the powerPrecautions to take when using headphones Connecting HeadphonesPlaying/Stopping the Demo Songs Listening to the Demo SongsListening to the Demo Songs Selecting a Song for PlaybackJohn Maul Profiles of ComposersNaoki Nishi Playing with Various Sounds Press any Tone button and confirm that its indicator is litTo cancel the Dual Play, press any Tone button Playing the Keyboard20-1 Changing the Split PointAdding Reverberation to the Sound-Reverb Effect Press the Reverb button to turn on the indicatorAdding Breadth to the Sound-Chorus Effect Press the Chorus button to turn on the indicatorOn / OffOn / Off Sounding the MetronomePress and hold the Metronome On/Off button Metronome tempo is adjusted by the Metronome Tempo sliderTry Recording Your Performance Press the Metronome On/Off button to turn on the indicatorRecording Recording will begin when you play a note on the keyboard Press the Rec button to turn on the indicatorWhile pressing the Play button, also press the Rec button Press the Play button to make the indicator lightListening to the Recorded Performance Deleting Recorded SongsWhile holding down the Demo Song/Key Convenient FunctionsChanging Keyboard Touch Sensitivity Transposing without Changing Your Fingering -Key TransposeSetting the Reference Pitch to 442.0 Hz Adjusting the Pitch of the Sound-Master TuningSounding a reference tone while you adjust the pitch Checking the depth of the Reverb Effect Changing the Volume Balance in Dual PlayChanging the Depth of the Reverb Changing the Depth of the ChorusPress and hold the Reverb and Chorus Buttons Playing Songs Using Tunings from Classical MusicChanging the Damper Pedal’s Resonance Checking the Resonance levelKey Temperament Description Changing Tuning CurvesAdjust the volume Before switching the power on, turn Volume all the way downPanel Lock with the metronome enabled Midi Out Connector Connecting to Midi DevicesAbout the Midi Connectors Midi In ConnectorThis sets it to Local On Switching Local On/OffThis sets it to Local Off Set the Midi Channel Switching Omni On/OffReceiving on all Midi channels- Omni On/Off Program Number Tone Transmitting/Receiving Sound Selection Data Program ChangeTransmitting Performance Data from Midi Out Turning Transmission Reception of Control Changes On/OffOutput Jacks Connecting to Audio EquipmentConnectors Making the ConnectionsWhen the MP-500 is connected to an external device TroubleshootingFunctions for Midi Functions Assigned to the KeyboardConvenient Functions Functions for TemperamentMidi Implementation Chart MP-500 Roland Digital Piano Specifications13-15 IndexInformation Avis Contents Name Qty

MP-500 specifications

The Roland MP-500 is a powerful and versatile digital piano tailored for both professional musicians and passionate hobbyists. Renowned for its rich sound palette and exceptional playing experience, the MP-500 combines advanced technologies with user-friendly features.

One of the standout features of the Roland MP-500 is its SuperNATURAL Piano technology. This innovative sound engine mimics the nuances of an acoustic piano, providing a highly authentic experience. Musicians can appreciate the natural decay of notes, responsive touch sensitivity, and dynamic range that reflects the subtleties of an experienced player. This technology also extends to a variety of other instrument sounds, creating a diverse sonic landscape for users to explore.

The keyboard action of the MP-500 is another remarkable characteristic. It boasts a PHA-4 standard keyboard with escapement, offering a weighted feel that emulates the touch of an acoustic piano. Each key is designed to respond dynamically to the player's touch, allowing for expressive playing whether performing delicate passages or powerful chords. This attention to tactile feedback makes the MP-500 an excellent choice for those who prioritize authenticity in their instrument.

Connectivity is a critical aspect of the Roland MP-500. It features a host of inputs and outputs, including USB, MIDI, and audio connections, which facilitate integration with music production software, recording devices, and external sound modules. The USB capability also allows for direct connection to computers, enhancing the versatility of the instrument for digital compositions.

In addition to its acoustic capabilities, the Roland MP-500 is equipped with a range of digital features. Users can access a library of onboard music styles and rhythms that can serve as accompaniment while practicing or performing. The built-in metronome and recording functions are invaluable tools for musicians looking to hone their skills or capture their creative ideas on the fly.

Furthermore, the MP-500 is designed for ease of use. The intuitive interface features a clear LCD display and dedicated controls that allow players to quickly navigate through sounds and settings, making it simple to customize the instrument to suit individual preferences.

With its combination of authentic sound, responsive action, extensive connectivity, and user-friendly interface, the Roland MP-500 is a standout choice for any musician seeking a high-quality digital piano experience. Its integration of acoustic piano nuances with modern digital technology positions it at the forefront of digital instruments, appealing to a broad audience of music lovers and performers alike.
Top Page Image Contents