Pioneer VSX-818V-K, VSX-918V-K Fine Speaker Distance, Volume increases to the reference level

Page 39

The System Setup menu

06

When it sounds like both tones are the same volume, press ENTER to confirm and continue to the next channel.

2a.Fine Channel Level

L

+

0.0dB

(Reference)

R

[

0.0dB ]

 

C

 

+1.0dB

 

LS

[

–3.0dB ]

 

RS

[ +10.0dB ]

 

SW

[

–1.5dB ]

 

:Finish

•For comparison purposes, the reference speaker will change depending on which speaker you select.

•If you want to go back and adjust a

channel, simply use

to select it.

3When you’re finished, press RETURN. You return to the Manual MCACC setup menu.

Fine Speaker Distance

• Default setting: 3.0 m (all channels)

For proper sound depth and separation with your system, it is necessary to add a slight bit of delay to some speakers so that all sounds will arrive at the listening position at the same time. The following setting can help you make detailed adjustments that you may not achieve using the Manual speaker setup on page 42.

1Select ‘Fine SP Distance’ from the Manual MCACC setup menu.

The volume increases to the reference level.

2.Manual MCACC

a.Fine Ch Level b.Fine SP Distance c.EQ AUTO Setting d.EQ Data Copy e.EQ CUSTOM1 Adjust

f .EQ CUSTOM2 Adjust g.EQ Data Check

:Return

2Adjust the distance of the left channel from the listening position.

2b.Fine SP Distance

L(Reference)

3.0 m

ENTER:Next :Cancel

After pressing ENTER, test tones will be output.

3Select each channel in turn and adjust the distance as necessary.

Use to adjust the delay of the speaker you selected to match the reference speaker. The delay is measured in terms of speaker distance from 0.1 m to 9.0 m.

2b.Fine

SP

Distance

L

 

3.0 m (Reference)

R

[

1.8 m ]

C

 

3.0 m

LS

[

1.3 m ]

RS

[

1.2 m ]

SW

[ 2.4 m ]

:Finish

Listen to the reference speaker and use it to measure the target channel. From the listening position, face the two speakers with your arms outstretched pointing at each speaker. Try to make the two tones sound as if they are arriving simultaneously at a position slightly in front of you and between your arm span.

When it sounds like the delay settings are matched up, press ENTER to confirm and continue to the next channel.

•For comparison purposes, the reference speaker will change depending on which speaker you select.

English Deutsch Français Italiano Nederlands Español

39

En

Page 38 Page 40
Image 39
Page 38 Page 40
Contents VSX-918V-S/-KVSX-818V-S/-K Operating Environment Important the Moulded PlugVentilation Caution Contents Additional information Other SettingsControlling the rest of your system Other connectionsLoading the batteries Before you startBefore you start Chapter Checking what’s in the boxListening to Surround Sound Minute guideMinute guide Chapter Introduction to home theater02 5 minute guide Switch on the receiver and your TVMinute guide English Deutsch Français Italiano Nederlands EspañolEnter Better sound using Phase Control Other problems when using the Auto Mcacc SetupPress Phase Phase Control to switch on phase correction Connecting up Connecting up ChapterMaking cable connections VSX-918V Connecting up Connecting a DVD player and TVUse a coaxial digital audio cable for the connection.1 ReceiverFrançais Connecting upConnecting the multichannel analog outputs ItalianoConnecting up Connecting other audio components About the WMA9 Pro decoderCD-R, MD, DAT, Tape recorder, etc Deutsch Connecting an HDD/DVD recorder, VCR and other video sourcesComponent 1 DVD Component 2 TV Component 3 DVR Connecting up Using the component video jacksConnecting using Hdmi Use a three-way component video cable for the connectionAbout Hdmi Connecting to the front panel video terminal Connecting up Connecting to the front panel audio mini jackTo improve AM reception Connecting up Connecting antennasUsing external antennas To improve FM receptionAntenna Connecting up Connecting the speakersTighten terminal Hints on speaker placementBare wire connections Twist exposed wire strands togetherSpeaker placement diagrams Switching the speaker systemFollowing illustrations show 5.1 channel speaker setups 14 15 16 Controls and displaysControls and displays Chapter Front panelDisplay Controls and displaysVIR. SB AnalogDTS PRO LogicControls and displays Remote control AV Parameter Master Volume +Setup Level +Class AccessSignal SEL Tuner DispTV VOL + Operating range of remote controlTV Control buttons TV CH +Listening in surround sound Listening to your systemListening to your system Chapter Auto playbackListening in stereo Using the Advanced surround effectsPress ADV Surr repeatedly to select a listening mode Listening to your systemListening to your system Using Front Stage Surround Advance Using Stream DirectUsing the Sound Retriever Using Virtual Surround Back VSB Listening to your system Setting the AV options SettingWhat it does Options CH1 Setting What it does OptionsSelecting the front audio inputs Choosing the input signalPress Portable SHIFT+iPod USB on the remote control Listening to your system Playing other sourcesManual Mcacc speaker setup System Setup menuSystem Setup menu Chapter Using the System Setup menuFine Channel Level System Setup menuSelect ‘Manual MCACC’ from the System Setup menu Select ‘Fine Ch Level’ from the Manual Mcacc setup menuAfter pressing ENTER, test tones will be output Select ‘Fine SP Distance’ from the Manual Mcacc setup menuVolume increases to the reference level Fine Speaker DistanceSetting the Acoustic Calibration EQ automatically Copying your Acoustic Calibration EQ settingsAcoustic Calibration EQ Might distort. If this happens, bring Setting the Acoustic Calibration EQ manuallySelect the channels you want and adjust to your liking Select ‘OK’ to copy and confirmManual speaker setup Speaker SettingChecking your Acoustic Calibration EQ settings Crossover Network Select ‘Speaker Setting’ from the Manual SP Setup menuSelect a setup option Select ‘Crossover Network’ from the Manual SP Setup menuAdjust the level of each channel using Select ‘Channel Level’ from the Manual SP Setup menuSelect ‘Speaker Distance’ from the Manual SP Setup menu Adjust the distance of each speaker UsingSpeaker Distance Listening to the radio Using the tunerUsing the tuner Chapter Tuning directly to a stationEnglish Deutsch Using the tuner Saving station presetsNaming station presets Listening to station presetsPress FM to select the FM band.3 Press PTY Search Using the tuner An introduction to RDSDisplaying RDS information Searching for RDS programsUsing EON Using the tunerMaking recordings Making recordings ChapterMaking an audio or a video recording Operating other Pioneer components Setting the remote to control other componentsControlling the rest of your system Controlling the rest of your system ChapterUse the number buttons to enter the preset code Clearing all the remote control settingsControlling the rest of your system Controls for TVs Buttons Function ComponentsSHIFT+ Function Components Controlling the rest of your systemControls for other components ENTER/DISCShift + DiscEnter Return SHIFT+ Edit ReturnDVD Recorder Controlling the rest of your system Preset Code ListOther connections Chapter Connecting an iPodConnecting your iPod to the receiver Other connectionsBasic playback controls Other connectionsIPod playback Finding what you want to playPress iPod Ctrl to switch the iPod controls.2 Connecting a USB deviceSwitching the iPod controls1 Symptom What it meansBasic playback controls Connecting your USB device to the receiverUSB ERR What it means Selecting a file from the folder/file list for playbackCompressed audio compatibility Other compatibility informationUsing this receiver with a Pioneer flat screen TV About MPEG-4 AACAbout WMA Front panel display shows SR+ on or OFF Using the SR+ mode with a Pioneer flat screen TVAssigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuOther Settings Assigning the component video inputsAssigning the Hdmi inputs Select the ‘PDP Volume Control’ setting you want Other Settings Other Setup menuSR+ Setup for Pioneer flat screen TVs Select ‘Other Setup’ then press EnterAdditional information Chapter TroubleshootingProblem Remedy Additional informationVSX-918V model only The SR Additional informationHdmi Symptom RemedyImportant information regarding the Hdmi connection Resetting the main unitSwitching the speaker impedance Configuration1Amplifier section Additional information Changing the TV format settingPower cord caution Cleaning the unitAM Tuner Section Component video sectionHdmi Section FM Tuner SectionPrinted XRB3091-A Pioneer Corporation

VSX-818V-K, VSX-918V-K specifications

The Pioneer VSX-918V-K and VSX-818V-K are both exemplary models in Pioneer’s range of home theater receivers, designed to deliver exceptional audio and video performance. These receivers highlight Pioneer's commitment to providing rich, immersive sound for a variety of entertainment formats.

One of the most significant features of the VSX-918V-K is its advanced 7.1 channel surround sound capability. This allows for a true multi-channel experience, making it an ideal choice for movie enthusiasts and gamers who seek depth and clarity in their audio. The VSX-818V-K, while being slightly less powerful with a 7.1 channel setup, still provides excellent audio performance with its clean and dynamic sound output, ensuring an engaging home cinema experience.

Both models are equipped with Pioneer’s latest Auto Room Tuning technology, which customizes the sound based on the room’s acoustics. This system utilizes a microphone and advanced algorithms to analyze the sound environment, adjusting settings to optimize performance. As a result, users can enjoy balanced audio whether they are in a small living room or a large theater space.

Another impressive feature is the incorporation of HDMI 1.3a support in both receivers, enabling high-definition audio and video passthrough. This capability ensures compatibility with the latest Blu-ray players, gaming consoles, and other HD devices. The receivers support various audio formats, including Dolby TrueHD and DTS-HD Master Audio, offering high-resolution sound that complements the latest film releases and video games.

In terms of connectivity, both the VSX-918V-K and VSX-818V-K feature multiple inputs, including composite and component video inputs, as well as optical and coaxial digital audio inputs. This extensive connectivity allows users to easily connect their devices and manage them through the intuitive on-screen GUI.

The models also boast a sleek design, with an appealing aesthetic that fits seamlessly into modern home theater setups. Their user-friendly interfaces and remote controls make navigation easy, ensuring that even non-technical users can enjoy a premium audio-visual experience.

Overall, the Pioneer VSX-918V-K and VSX-818V-K provide a robust set of features, ensuring outstanding audio fidelity and versatility, making them excellent choices for anyone looking to enhance their home entertainment systems.
Top Page Image Contents