Connecting Your Equipment
Operating other Pioneer Components with this Unit’s Sensor
By connecting a control cord to the CONTROL terminals of the respective equipment, you can control several Pioneer components using one remote sensor. Following the diagram below you will see that one component feeds the CONTROL OUT terminal and on the other end another component is connected to the CONTROL IN terminal. The component that is the end point (the one that has a cord hooked up to its CONTROL OUT only) it is the component whose sensor you will use. Point the remote control at that sensor when you want to operate the any of the equip- ment connected by this system. In the example below you would point the remote control unit towards the remote sensor of the equipment on the left.
•You can also control Pioneer components by pointing the receiver's remote control directly at the component. This type of operation does not require control cords. See page 44 for more information.
•To use this kind of remote control you have to hook up a control cord AND the have the component and receiver hooked up with analog RCA audio/video cords as well (see pages
English
Point remote control towards remote sensor of component that only has a cord connected to its CONTROL OUT terminal
Components with an CONTROL terminals
Mono mini plug (optional)
Components with an CONTROL terminals
Mono mini plug (optional)
T V/ | T V/ |
|
| FRONT | SPEAKERS | SURROUND |
|
|
SAT | SAT | 1 | R |
| L CENTER R |
| L | AC IN |
(DVD) |
|
| ||||||
OPT1 | IN | MONITOR |
|
|
|
|
|
|
DVR / | DVR/ | OUT |
|
|
|
|
|
|
VCR | VCR | 2 | AM LOOP |
|
|
|
|
|
OPT2 | IN | F M UNBAL75 Ω |
|
|
|
|
| |
| ANTENNA |
|
|
|
|
| ||
|
|
|
|
|
|
| ||
DVD | DVD |
|
| R | L |
|
|
( T V / |
|
| DVR / |
|
|
| |
SAT) | IN |
|
|
|
|
| |
|
|
| VCR |
|
|
| |
COA X |
|
|
| SUB | IN | OUT | |
R | L |
| OUT | ||||
DIGITAL IN |
| AUDIO | VIDEO | AUDIO | WOOFER | CONTROL | |
| OUT |
|
| ||||
Plugging in the Receiver
After you have connected all your components, including the speakers, plug the receiver into a wall outlet.
SPEAKERS | SURROUND | L |
L CENTER R |
|
AC IN
IN OUT
CONTROL
Power cord CAUTION!
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit or a piece of furni- ture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service
to wall outlet
•The power cord is removable from main unit for storage.
center or your dealer for a replacement.
21
En