When using this product follow the instructions written on the underside of the unit, which concern rated voltage, etc.
This product is for general household purposes. Any failure due to use for other than household purposes (such as
Operating Environment H045 En
Operating environment temperature and humidity:
+5°C – +35°C (+41°F – +95°F); less than 85%RH (cooling vents not blocked)
Do not install in the following locations
•Location exposed to direct sunlight or strong artificial light
•Location exposed to high humidity, or poorly ventilated location
VENTILATION: When installing this unit, make sure
to leave space around the unit for ventilation to improve heat radiation (at least 20 cm at top, 50 cm at rear, and 10 cm at each side).
WARNING: Slot and openings in the cabinet are
provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, to prevent fire hazard, the openings should never be blocked and covered with items, such as newspapers, tablecloths, curtains, etc. Also do not put the apparatus on the thick carpet, bed, sofa, or fabric having a thick pile.
TWO VOLTAGE SELECTOR SWITCHES (multi-voltage model only)
Only
Only
U.S. and Canadian models are not
The line voltage selector switches are on the rear panel. Check that they are set properly before plugging the power cord into the household wall socket. If the voltage is not properly set or if you move to an area where the voltage requirements differ, adjust the selector switches as follows.
1.Use a
2.First, insert the screwdriver in the groove of the voltage selector at the right, and adjust so that the tip of the groove points to the voltage value of your area.
3.Next, insert the screwdriver in the groove of the voltage selector at the left and adjust until the voltage is the same as at the right.
TWO VOLTAGE 220V SELECTORS 240V
| 220V |
240V | |
110V | 110V 120 |
CAUTION 220 V
Power source voltage is factory adjusted 220 volts. If your area is different, change voltage selectors settings.
4
En