Controlling the Rest of Your System
Recalling Preset Codes
The following steps show you how to recall preset codes for each Input/Control Mode Select button or the TV CONTROL buttons. In the former case, once the preset code is assigned, pressing the button will automatically set the remote to operate the respective component.
•Refer to “Preset Code List” on pages 49 for the components and manufacturers available. You should have no problem controlling a component if you find the manufacturer in this list, but you can only set these codes for the button that is assigned to that component. So, for example, the TV codes can only be set to the TV/SAT button.
Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for the manufacturer in the list will not work for the model that you are using.
•Refer to “Controlling the Rest of Your System” on pages 47 & 48 for detailed explanations on how to operate your other components.
LED
| RECEIVER |
|
| SOURCE |
| SIGNAL SELECT |
|
| |
1 |
|
|
| SLEEP |
DVD | TV/SAT | FRONT |
| |
|
|
| DIMMER | |
DVR/ VCR | FM / AM |
|
| |
AUTO | SURROUND ADVANCED | SOUND | ||
| MODE | |||
| SETUP | TEST TONE | CH_SELECT | ROOM |
| SETUP | |||
1While pressing the ENTER button press the
Input/Control Mode Select button you want to preset. For the TV CONTROL buttons press the TV CONTROL 
(Power) button while pressing the ENTER button.
The LED lights.
To cancel the preset mode at any time Press ENTER.
The remote control will also return to the previous mode after thirty seconds of inactivity.
2Use the number buttons to enter the 3 digit setup code (see pages 49 for “Preset Code List”).
The LED turns off.
After a code has been input the power of the compo- nent being input will turn on or off.
The remote will return to the previous mode after thirty seconds of inactivity.
The power of the component being input will only turn on or off if that component is able to be turned on directly by remote control.
3Repeat process to assign preset codes for as many components as you want.
English
ENTER
MUTE
MASTER
VOLUME
| TOP MENU | DISPLAY | T.EDIT MENU | |
| DTV MENU | TUNE |
|
|
|
|
|
| |
| ST |
| ST |
|
|
| ENTER |
| |
| AUDIO | TUNE |
| SUBTITLE |
|
|
|
| |
|
|
| GUIDE | |
| CH RETURN | DTV ON /OFF | DTV INFO | |
|
| CLASS | MPX | D.ACCESS |
|
|
|
| ENTER |
|
|
|
| 10 |
1 |
| TV CONTROL |
| |
CHANNEL | INPUT | CHANNEL | VOLUME | |
SELECT | ||||
TV CONTROL
(power)
1
2
•You can only input a code for the component type written on each Input/Control Mode Select button.
•Even if you don’t input a preset code for the TV (TV/ SAT Input/Control Mode Select button) you will be able to control your TV using the dedicated TV CONTROL on the remote.
CAUTION:
•You may not be able to use a particular code even if it is listed on pages 49.
•The remote control buttons will not be able operate other equipment unless preset with the method above.
RECEIVER
45
En