SANRAD V-Switch manual Managing a Cluster, Neighbor set, VSwitch2 212.199.43.75, Neighbor remove

Managing a Cluster

If you modify a V-Switch alias or management IP address, you must implement the updates in the neighboring V-Switch. Use the CLI command neighbor set to update a V-Switch on changes in its neighbor.

neighbor set

You need to define the parameter(s) to modify to reset a neighbor alias or IP address in a cluster.

SWITCH PARAMETER DEFINITION STATUS EXAMPLE

-nb	NEIGHBOR ALIAS	NEIGHBORING V-	OPTIONAL
		SWITCH IN
		CLUSTER
-ip	NEIGHBOR	MANAGEMENT IP	OPTIONAL
	MANAGEMENT IP	OF THE
	ADDRESS	NEIGHBORING V-
		SWITCH

VSwitch2

212.199.43.75

Use the CLI command neighbor remove to remove a neighbor from a cluster.

neighbor remove

You need to define two parameters to remove a neighbor.

SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
-nb	NEIGHBOR ALIAS	NEIGHBORING V-	MANDATORY	VSwitch2
		SWITCH IN
		CLUSTER

-ip

NEIGHBOR	MANAGEMENT IP	MANDATORY
MANAGEMENT IP	OF THE
ADDRESS	NEIGHBORING V-
	SWITCH

Chapter 5: V-Switch Cluster Configuration 81