SANRAD V-Switch Source Destination Oper Admin Progress Status, Synch None, Synch DataRep, 262

STEP 3. REPLICATE DATA

Use the CLI command volume copy create to begin replicating the data.

The legacy volume is the source volume. The new volume is the destination volume.

volume copy create –src OS1 –dst NS1

volume copy create –src OS2 –dst NS2

volume copy create –src OS3 –dst NS3

volume copy create –src OS4 –dst NS4

STEP 4. CHECK REPLICATION STATUS

Use the CLI command volume mirror show to check the replication status.

Table 71:	Replication Status
Source	Destination	Oper	Admin	Progress
		Status	Status
NONE	OS1	synch	None	0
OS1	NS1	synch	dataRep	25
NONE	OS2	synch	None	0
OS2	NS2	synch	dataRep	13
NONE	OS3	synch	None	0
OS3	NS3	synch	dataRep	7
NONE	OS4	synch	None	0
OS4	NS4	synch	dataRep	2

The simple volumes can be exposed independently to hosts or used as building blocks in another volume hierarchy.

262 SANRAD V-Switch User Manual