SANRAD V-Switch manual Switch Configuration

4

V-Switch Configuration

IN THIS

CHAPTER

INTRODUCTION TO

MANAGING THE V-

SWITCH

CONFIGURING THE V-

SWITCH 3000

MANAGEMENT

PARAMETERS VIA LCD

CONFIGURING THE

MANAGEMENT

CONSOLE

INITIALIZING THE V- SWITCH

CHANGING

MANAGEMENT

PARAMETERS

CONFIGURING THE STORAGE PORTS

CONFIGURING THE NETWORK PORTS

DISCOVERING ISCSI TARGETS

CONFIGURING ISCSI PORTALS

CONFIGURING IP

ROUTING

After the V-Switch is connected properly to the physical disks, management station and the network and powered up, the V- Switch must be configured.

The basic V-Switch configurations define the management IP configurations and can be done either via the LCD panel for the V- Switch 3000 or the RS232 console port for both the V-Switch 3000 and the V-Switch 2000.

Once the management port is configured, any other V-Switch configuration can be executed through the management port or continued through the RS232 console port.

Disks and LUNs connected to the storage ports are discovered and registered automatically.

Chapter 4: V-Switch Configuration 45