![](/images/new-backgrounds/1143853/143853175x1.webp)
Use the CLI command cluster set to modify the default keep alive intervals.
cluster set
You need to define the parameters you want to modify in the keep alive interval.
SWITCH | PARAMETER | DEFINITION | STATUS | EXAMPLE |
-kai
-sint
KEEP ALIVE | TIME BETWEEN | OPTIONAL | 5 |
INTERVAL | ALIVE SIGNALS | DEFAULT: 2 SEC |
|
| FROM NEIGHBORS |
|
|
SUSPICIOUS | TIME FROM WHEN A | OPTIONAL | 10 |
INTERVAL | SIGNAL WAS | DEFAULT: 6 SEC |
|
EXPECTED BUT NOT
RECEIVED
| FAILOVER INTERVAL TIME WHEN | OPTIONAL | 10 |
| SUSPICIOUS | DEFAULT: |
|
| INTERVAL IS | 10 SEC |
|
EXCEEDED
82 | SANRAD |