SANRAD V-Switch manual Volumes, Renaming a Volume, Removing a Volume

Volumes

If you are working in

aV-Switch cluster, the volume must be renamed on both V- Switches.

Renaming a Volume

After creating a volume you can rename it. Renaming a volume will have no negative effect on the volume hierarchies built on the renamed volume.

volume set

You need to define two parameters to rename a volume:

SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
-vol	VOLUME ALIAS	ALIAS OF VOLUME	MANDATORY	Concat1
		TO RENAME
-n	NEW ALIAS	NEW VOLUME ALIAS	MANDATORY	JPGRepos

Example:

volume set –vol Concat1 –n JPGRepos

If you are working in

aV-Switch cluster, the volume must be removed on both V- Switches.

Removing a Volume

You can remove a volume. The volume must be inactive, that is not exposed, and it must be at the top level of its volume hierarchy. For example, you cannot remove a simple volume from within a set of volumes creating a striped volume. The striped volume is at the top of the hierarchy must be removed first.

volume remove

You need to define one parameter to remove a volume:

SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
-vol	VOLUME ALIAS	ALIAS OF TOP-	MANDATORY	Stripe1
		LEVEL VOLUME TO
		REMOVE

162 SANRAD V-Switch User Manual