SANRAD V-Switch manual Management Port Connection, Switch 3000 Management Port

Management Port Connection

The management port, labeled 10/100 mgmt, is located on the front center of the V-Switch 3000. Use this 10/100 port to connect a host station either directly or via a network to the V-Switch 3000. When connecting directly to the V-Switch 3000 via 10/100, use a male-female straight cable. When connecting via a network, use a standard network cable. For more information on V-Switch 3000 management options, please refer to “Introduction to Managing the V-Switch,” page 46.

Management Port - RJ45

10219

Figure 19. V-Switch 3000 Management Port

The management port has two LEDs:

act – indicates whether the port is connected and active: green – active; blinking – port traffic

100 – indicates how the port is operational: on – 100; off – 10.

act LED

10076

100 LED

Figure 20. V-Switch 3000 Management Port LEDs

Chapter 3: Installing the V-Switch 3000 41