SANRAD V-Switch manual Microsoft iSCSI Initiator, 268

Use the CLI command volume create striped to create a striped volume, Stripe1.

volume create striped –vol Stripe1 –nbc 2 –sus 64 –ch Mirror1 –ch Mirror2

STEP 13. CREATE ISCSI TARGET AND LUN

After creating the final virtual volume configuration that you want to expose to the network hosts, you need to create an iSCSI target for the volume as well as attach LUN0 to the target volume. Use the CLI command volume expose

-newto create the iSCSI target and attach LUN0 to the striped volume, Stripe1.

volume expose -new –vol Stripe1 –ta storage –tn billing.sanrad –device VSwitch

STEP 14. CONFIGURE HOST STATION INITIATOR

Open the Microsoft iSCSI initiator program on host station 1.

Figure 108. Microsoft iSCSI Initiator

Click Add from the Target Portals tab. The Add Target Portal dialog box opens.

268 SANRAD V-Switch User Manual