SANRAD V-Switch Adding Initiators to an Identity, Acl identity add name, Iqn.1991-05, Microsoft

If you are working in

aV-Switch cluster, each initiator must be added on both V- Switches.

Adding Initiators to an Identity

After creating an identity, you can begin adding hosts by their iSCSI initiator WWUIs to the identity. The identity is a group of iSCSI initiators. It is not enough for an authorized host to request access to a target. The host must be requesting access from the correct iSCSI initiator. Use the CLI command acl identity add name to add iSCSI initiators to an identity. Repeat this command to add all of the desired host initiators to the identity.

acl identity add name

You need to define two parameters to add an initiator an identity:

SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
-id	IDENTITY	ALIAS OF IDENTITY	MANDATORY	accounting
-name	INITIATOR NAME	WWUI OF	MANDATORY	iqn.1991-05.
		INITIATOR		microsoft:
				steven.sanrad

122 SANRAD V-Switch User Manual