SANRAD V-Switch manual Disks and Subdisks, Discovering Storage Devices, 30.30.20.20 Eth2

-gw	GATEWAY IP	IP ADDRESS OF	MANDATORY
	ADDRESS	THE GATEWAY
		ROUTER
-if	INTERFACE	INTERFACE ALIAS	MANDATORY
	ALIAS	ROUTING PATH
		MAPS TO

30.30.20.20

eth2

Example:

The IP route from network port Eth2 to external network 10.10.20.20, with IP mask 255.255.255.0 is removed from Eth2.

ip route remove –dip 10.10.20.20 –dmask 255.255.255.0 –gw 30.30.20.20 –if eth2

Disks and Subdisks

Discovering Storage Devices

The V-Switch default algorithm for storage devices discovery is using the SCSI command REPORT LUNS. Certain storage devices either do not support this command or do not respond according to the SCSI standard. To discover these devices, the REPORT LUNs command must be disabled. If certain devices in the SAN are not being discovered by the V-Switch, use the CLI command device set to disable or re-enable device discovery via REPORT LUNs.

Chapter 10: Routine V-Switch Maintenance 181