SANRAD V-Switch manual Adding a User Profile, Changing a User Profile, Removing a User Profile

All CLI names and aliases are case sensitive.

Adding a User Profile

A total of ten user profiles can be configured on a V-Switch. Use the CLI command admin add to add a user login profile

admin add

You must define two parameters to add a user profile:

	SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
If you are working in
	-un	USER NAME	USER NAME	MANDATORY	Joe Cool
a V-Switch cluster, a
user profile must be	-pw	PASSWORD	USER PASSWORD	MANDATORY	123456
added on both V-

Switches.

Example:

admin add –un Joe Cool –pw 123456

If you are working in a V-Switch cluster, a user profile must be changed on both V- Switches

If you are working in a V-Switch cluster, a user profile must be changed on both V- Switches

Changing a User Profile

This interactive command enables a user to change their login password for their user name on the V-Switch.

admin password

After entering the command, you are prompted to enter your existing password and the new password.

Removing a User Profile

You can remove any user profile from the V-Switch database except the profile you are logged in with. This ensures at least one user profile in the database at all times.

admin remove

You must define one parameter to remove a user profile:

SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
-un	USER NAME	USER NAME	MANDATORY	Joe Cool

Example:

admin remove –un Joe Cool

Chapter 10: Routine V-Switch Maintenance 175