![](/images/new-backgrounds/1143853/143853193x1.webp)
| JBOD 1 |
Disk 1 | Disk 2 |
Disk 3 | Disk 4 |
| JBOD 2 |
Disk 5 | Disk 6 |
Disk 7 | Disk 8 |
| 10066 |
If you are working in
a
Figure 38. Disk 1 before Subdisk
In Figure Error! Bookmark not defined., page Error! Bookmark not defined., Subdisk 1 has been created on Disk 1. The subdisk is 18,000,000 blocks long (9 GB). The Volume Manager begins counting the 18,000,000 blocks from block 0.
subdisk create –d Disk1 –sl 18000000 –sa 0 –sd Subdisk1
| JBOD 1 |
Disk 1 | Disk 2 |
Subdisk 1 |
|
Disk 3 | Disk 4 |
| JBOD 2 |
Disk 5 | Disk 6 |
Disk 7 | Disk 8 |
| 10067 |
Figure 39. Disk 1 with 1 Subdisk
After creating the subdisk, you can use the CLI command subdisk show to view it and all configured subdisks. You can use the CLI command subdisk details to view the details of the created subdisk.
subdisk details
Chapter 6: Volume Configuration | 91 |