![](/images/new-backgrounds/1143853/143853231x1.webp)
An iSCSI initiator can be listed in multiple identities.
wwui1
wwui2
wwui3
wwui4
wwui5
wwui6
wwui7
wwui8
wwui9
wwui10
Ident A
Ident B
10149
Figure 55. Identity B’s iSCSI Initiators
In Figure 55, there are six iSCSI initiators in Identity B: WWUI 3, 4, 6, 7, 8 and 9. Note that iSCSI initiator 8 is in both Identity A and B. An iSCSI initiator can be listed in multiple identities.
wwui1
wwui2
wwui3
wwui4
wwui5
wwui6
wwui7
wwui8
wwui9
wwui10
Ident A
Ident B
Ident C
10150
Figure 56. Identity C’s iSCSI Initiator
In Figure 56, there is only one iSCSI initiator in Identity C: WWUI10.
Identities are coupled with iSCSI targets to limit iSCSI initiator access to a target’s underlying volumes. An identity can be used with more than one target and each target can have more than one identity.
110 | SANRAD |