SANRAD V-Switch manual Targets and Exposure, Removing an LU, Changing iSCSI Target Parameters

	Targets and Exposure
	Removing an LU
If you remove LU 0	Before you can remove a volume, you must remove any attached LU.
from a target, you will
inactivate the target	lu remove
even if the target has	You need to define two parameters to remove an LU:
other attached LUs.
	SWITCH PARAMETER	DEFINITION	STATUS	EXAMPLE

If you are working in	-ta
a V-Switch cluster,
the LU must be
removed on both V-	-lun
Switches.

TARGET ALIAS	ALIAS OF TARGET	MANDATORY
	FROM WHICH TO
	REMOVE LU
LOGICAL UNIT	LU TO REMOVE	MANDATORY
NUMBER	FROM THE TARGET

Accounting

8

Example:

lu remove –ta Accounting –lun 8

If you are working in

aV-Switch cluster, the target alias must

be changd on both V- Switches.

Changing iSCSI Target Parameters

This command renames a target alias. Renaming the alias will have no negative effect on the target exposure.

iscsi target set

You need to define two parameters to rename an iSCSI target alias:

SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
-ta	TARGET ALIAS	ALIAS OF TARGET	MANDATORY	accounting
		TO RENAME
-na	NEW ALIAS	NEW ALIAS FOR	MANDATORY	finance
		TARGET

Example:

The target alias accounting is renamed to finance.

iscsi target set –ta accounting –na finance

Chapter 9: Routine Volume Maintenance 167