SANRAD V-Switch manual Sample Configurations 253, Create Iscsi Target and LUN

volume create mirror –vol Mirror1 –nbc 2 –ch Simple1 –ch Simple2

Use the CLI command volume create mirror to create a mirrored volume, Mirror2, from simple volumes Simple3 and Simple4.

volume create mirror –vol Mirror2 –nbc 2 –ch Simple3 –ch Simple4

STEP 11. CREATE STRIPED VOLUME (RAID 0)

Use the CLI command volume create striped to create a striped volume, Stripe1.

volume create striped –vol Stripe1 –nbc 2 –sus 64 –ch Mirror1 –ch Mirror2

STEP 12. CREATE ISCSI TARGET AND LUN

After creating the final virtual volume configuration that you want to expose to the network host, you need to create an iSCSI target for the volume as well as attach LUN0 to the target volume. Use the CLI command volume expose -newto

create the iSCSI target and attach LUN0 to the striped volume, Stripe1.

volume expose -new –vol Stripe1 –ta storage –tn sanrad.billing. –device VSwitch

STEP 13. CONFIGURE HOST STATION INITIATOR

Open the Microsoft iSCSI initiator program on host station 1.

Sample Configurations 253