SANRAD V-Switch manual Device set -telnet, Fc interface show, 21/04/2002, Fc2 2000002038001064

SWITCH	PARAMETER	DEFINITION	STATUS		EXAMPLE
-p	UDP PORT	PORT THROUGH	OPTIONAL
		WHICH ALL UDP	DEFAULT:	161
		COMMUNICATIONS
		WILL FLOW –
		NAMELY FOR SNMP
-d	DATE	LOCAL DATE	OPTIONAL		21/04/2002
-t	TIME	LOCAL TIME	OPTIONAL		13:30
-c	CONTACT	CONTACT PERSON	OPTIONAL		AnnaLevin
		IN THE EVENT OF A
		SYSTEM
		MALFUNCTION
-loc	LOCATION	LOCATION OF THE	OPTIONAL		ext4838
		CONTACT PERSON
-if	MANAGEMENT	MANAGEMENT PORT	MANDATORY		eth1
	INTERFACE ALIAS	NAME	ETH1
-rld	REPORT LUN	MODE FOR	MANDATORY		no
	DISCOVERY	DISCOVERING	YES OR NO
		DEVICE LUNS
			DEFAULT:	YES

Example

device set –n VSwitch1 –ip 212.199.43.46 –d 21/04/2002 – t 13:30 –c AnnaLevin. –loc ext4838 –if eth1 –rld no

device set -telnet

This command changes the Telnet port from the default port number to a user defined port number. Establishing a Telnet connection on an alternate port (not the expected port 23) provides increased line security.

device set -telnet

Example

device set -telnet 49155

fc interface show

This command shows each FC port and its World Wide Port Name (WWPN).

fc interface show

Alias	WWPN
fc2	20:00:00:20:38:00:10:64

Chapter 11: Command Line Interface 201