SANRAD V-Switch manual 212.199.43.46, Init -n VSwitch -ip

Enter the default user name, sanrad, and password, sanrad, and press Enter on your keyboard. The CLI prompt > appears. You are now logged in and ready to begin configuring your V-Switch for volume virtualization and exposure.

STEP 3. INITIALIZE THE V-SWITCH

Use the CLI command init to configure the V-Switch management parameters.

init

You need to define five parameters to configure the V-Switch for the first time:

SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
-n	NAME	USER-ASSIGNED	MANDATORY	VSwitch
		NAME FOR THE V-	DEFAULT:
		SWITCH	VSWITCH
-ip	MANAGEMENT IP	IP ADDRESS OF	MANDATORY	212.199.43.46
	ADDRESS	THE MANAGEMENT
		PORT
-im	MANAGEMENT IP	IP MASK FOR THE	OPTIONAL
	MASK	MANAGEMENT PORT	DEFAULT:
			255.255.255.0
-p	UDP PORT	PORT THROUGH	OPTIONAL
		WHICH ALL UDP	DEFAULT: 161
		COMMUNICATIONS
		WILL FLOW –
		NAMELY FOR SNMP
-if	INTERFACE ALIAS	ALIAS OF PORT FOR	OPTIONAL
		MANAGING V-	DEFAULT: MGMT
		SWITCH	(ETH1 OR
			MGMT)

Example:

init –n VSwitch –ip 212.199.43.46

After the V-Switch is initialized, this CLI command will disappear from the CLI menu.

Chapter 4: V-Switch Configuration 51