Replacing a Mirrored Volume
After configuring the above setup, you notice that Disk 4 in your JBOD has gone offline. Simulate this by removing a physical disk from the JBOD case. You must replace the disk with a new one and reconstruct the volume hierarchy built with the simple volume on Disk 4. Your mirrored volume, Mirror2; created from simple volumes 3 and 4 on disks 3 and 4 respectively, will continue to operate while your physical disk is down and you replace one of its simple volumes.
This example explains how to:
Identify a failed disk.
Replace a failed disk.
Synchronize a volume to an existing mirrored volume.
Remove a failed volume from the
Remove a failed disk from the
256 | SANRAD |
