SANRAD V-Switch manual Init -n VSwitch1, Sample Configurations 275

Figure 113. V-Switch 3000 Login Screen

Enter the default user name, sanrad, and password, sanrad, and press Enter on your keyboard. The CLI prompt > appears. You are now logged in and ready to begin configuring your V-Switch for volume virtualization and exposure.

STEP 7. NAME V-SWITCH 1

Use the CLI command init to name V-Switch 1. You will need this name later for exposing volumes.

init –n VSwitch1

STEP 8. LOGIN TO THE V-SWITCH 2 MANAGEMENT PORT

From your management terminal, open another Telnet session, this time with the management port on V-Switch 2.

From the Windows Start menu, select Run. In the Open window, enter:

telnet 212.199.43.42

Click OK. A Telnet session window opens.

Press Enter on your keyboard to open the V-Switch 3000 Login window.

Figure 114. V-Switch 3000 Login Screen

Enter the default user name and password and press Enter on your

k b d Th CLI	t >	Y	l	d i	d
Sample Configurations					275