![](/images/new-backgrounds/1143853/143853531x1.webp)
STEP 6. SYNCHRONIZE MIRROR
Use the CLI command volume mirror synch to synchronize the new
volume data with its intact mirrored volume, Simple3. Once you execute this command, the new mirrored volume will be fully functional.
volume mirror synch –src Simple3 –dst Simple5
The synchronization is finished when the volume status of Simple5 changes from NeedSync to Exposed.
STEP 7. REMOVE FAILED VOLUME
Use the CLI command volume remove all to remove the
volume remove all –vol Simple4
STEP 8. REMOVE FAILED DISK
Use the CLI command volume storage remove to remove the failed disk from the
storage remove –s Stor_4
Use the CLI command storage show to view the updated storage disk table.
Table 68: | Failed Storage Disk Removed |
|
| |
Alias | Entity Name | LUN | Oper. Status | Subdisk |
Stor_1 | 500507606058c90 | 0 | Enabled | entire |
Stor_2 | 2000002037f88fb8 | 0 | Enabled | entire |
Stor_3 | 2000002037c32b1f | 0 | Enabled | entire |
Stor_5 | 500708206059f880 | 0 | Enabled | entire |
Sample Configurations | 259 |