SANRAD manual Configuring IP Routing, Only one of these paths can be configured for V-Switch

You can configure only one IP route to a given external network on your V- Switch.

Configuring IP Routing

To enable communications between the V-Switch and IP networks located outside the V-Switch LAN, you must configure IP routing paths for each external network port. The IP route begins with a specified network port on the V-Switch and ends at the external network IP address. Just as each IP address is unique, each IP routing path is unique. There can be only one IP route to a given external network IP address per V-Switch.

In Figure 31, page 68, you have two V-Switches connected to three different LANs (A, B, C). In turn, each LAN is connected to at least one external network (D, E, F).

On V-Switch 1, network ports Eth1 and Eth2 can both access Network D:

PORT	LAN	ROUTER LEG
ETH1	A	20.20.10.20
ETH2	B	30.30.20.20

Only one of these paths can be configured for V-Switch 1.

Network E

10.11.30.0

Network D Network F

10.10.20.0	R	10.12.40.0
		12.11.20.20
R		R
30.30.20.20		20.22.11.11
20.20.10.20	D B
D A
LAN A	LAN B	LAN C

		10227
V Switch 1	V Switch 2

Figure 31. IP Routing Options

66 SANRAD V-Switch User Manual