SANRAD V-Switch manual Volume remove -all, Volume replace

SWITCH PARAMETER DEFINITION STATUS EXAMPLE

-vol

-na

-lt

VOLUME	ALIAS OF VOLUME	MANDATORY
	TO CHANGE
NEW ALIAS	NEW ALIAS FOR	MANDATORY IF
	VOLUME	CHANGING ALIAS
LOAD THRESHOLD	PERCENTAGE FULL	MANDATORY IF
	AT DESTINATION	CHANGING LOAD
	TO TRIGGER AN	THRESHOLD
	ALARM

Subdisk7

Simple7

70

volume remove

This command removes a volume from the system. The volume must be at the top of the hierarchy. The volume cannot be exposed; the volume LU must be inactivated.

volume remove

SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
-vol	VOLUME	ALIAS OF VOLUME	MANDATORY	Stripe3
		TO REMOVE

volume remove -all

This command removes a volume and all volumes composing it in the hierarchy. The volume must be at the top of the hierarchy. The volume cannot be exposed; the volume LU must be inactivated. Simple volumes will convert back to their component disks or subdisks.

volume remove -all

SWITCH	PARAMETER	DEFINITION	STATUS	EXAMPLE
-vol	VOLUME ALIAS	ALIAS OF TOP-	MANDATORY	Stripe 1
		LEVEL VOLUME TO
		REMOVE

volume replace

This command replaces a volume with another volume. Use this command after a disk failure to replace a volume used in a storage hierarchy with a volume on a functional disk.

If you are replacing a volume used as part of a mirrored volume, use the CLI command volume mirror-synchto synchronize the replacement volume with the other mirrored volume(s). See the working example:

“Replacing a Mirrored Volume,” page 256.

226 SANRAD V-Switch User Manual