Jensen VM9324 manual Volume Adjustment, External Devices, Micro SD Slots for service use only

VM9324

NOTE: You can press and hold to drag the “Source Menu” icons and rearrange them based on your preference

External Devices

External peripheral devices, including a game console, camcorder, navigation unit, iPod, Zune, etc. can be connected to this unit via RCA output using the A/V Media Adapter Cable (included).

EJECT

A / V

INPUT

1 Right Audio

2 Left Audio

3 Ground

4 Video

3.5mm A/V Cable (not included)

Connect the external device to the A/V Media Adapter Cable and then plug the cable into the A/V INPUT connector (6) on the front of the radio. Select “AUX 1” mode to access the front A/V input or “AUX 2” mode for the rear aux input. You cannot directly control external devices connected to the A/V INPUT. For information regarding the use of USB/SD devices, see “Inserting a USB Device” or “Accessing an SD Card” on page 42.

Micro SD Slots (for service use only)

The micro SD slot, located in the upper right corner of the front panel, cannot be used for file playback. This input is for use by service professionals only for software updates.

Volume Adjustment

Volume Increase/Decrease

To increase or decrease the volume level, turn the rotary encoder (1) on the front panel or press the VOL-/+buttons (15, 16) on remote control. When the volume level reaches “0” or “40”, a beep sounds, indicating that the adjustment limit has been reached. The LCD or TFT screen displays the volume level for 3 seconds.

13