Jensen VM9324 manual Dvd/Vcd Video Operation, Inserting a Disc, Ejecting a Disc

VM9324

DVD/VCD VIDEO OPERATION

NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “WARNING!!! It is illegal to view video while driving or operating a motor vehicle, Set parking brake to view video.” Rear video screens, if applicable, will operate normally.

Inserting a Disc

Upon inserting a DVD disc in the disc slot (7), DVD mode is entered and disc play begins.

NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the 4-digit code must be entered and/or the disc must be authorized (see “VIDEO Sub-menu Features” on page 22).

You cannot insert a disc if there is already a disc in the unit or if the power is off.

NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed.

Ejecting a Disc

Press the button (8) on the unit or remote control (35) to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.

Resetting the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism operation occurs,

press and hold the button (8) on the unit or remote control (35) to reset the loading mechanism. Normal operation resumes.

29