MUSTANG™ III/IV/V
Getting Started | Volume & Tone |
To set up your Mustang™ amplifier:
1..Plug the supplied power cord into a grounded outlet.
2..Plug in the stereo 4x12" speaker cabinet (Mustang V only).
3..Plug your guitar into the INPUT jack.
4..Press the POWER switch to turn the amplifier ON.
5..Adjust the MASTER volume level.
♫MASTER volume is the only knob you need to adjust at first because the settings of all the other knobs are pre- programmed into each PRESET.
The MASTER volume knob is always "active." That means the position of the MASTER volume knob always shows the true master volume setting, unlike the programmable knobs.
(Always turn the MASTER volume knob first to adjust the overall volume output of your Mustang amplifier.)
Programmable Knobs
Because the setting of every knob (except MASTER) is part of each preset, the "programmable" knobs are inactive and knob positions will NOT show their actual settings when each preset is first selected.
MASTER volume is always active
??????
PROGRAMMABLE knobs are inactive unless turned
How do I activate a programmable knob? The moment you turn any programmable knob it instantly becomes active and it will remain active until you select a different preset, at which time all programmable knobs become inactive again.
Selecting Presets
Turn the DATA WHEEL to select one of 100 presets.
Preset contents are displayed
on screen for each preset
DATA |
WHEEL |
You will find some presets you like and others that you want to change...
Each preset stores the settings for:
•Amplifier type — 12 selections
•Effects — 4 categories, 37 selections total
•Knob levels — GAIN through REVERB (not MASTER)
♫To learn how to create your own presets, please see the Advanced Owner's Manual on your Mustang DVD or at www.fender.com/support
?????
Turn a PROGRAMMABLE knob to activate it
Press the DATA WHEEL to see what the preset settings are for all the programmable knobs before you turn them. Press EXIT to return to Play mode.
To view preset knob settings, push the DATA WHEEL |
♫As you navigate through the various screens, if you get lost, just press EXIT to return to Play mode.
6 | f e n d e r . c o m |