Pioneer VSX-D411 operating instructions Hints on speaker placement

Page 17

Connecting up

03

Make sure that all the bare speaker wire is twisted together and inserted fully into the speaker terminal. If any of the bare speaker wire touches the rear panel it may cause the power to cut off as a safety measure. Use good quality speaker wire to connect the speakers to the receiver.

Hints on speaker placement

Speakers are usually designed with a particular placement in mind. Some are designed to be floorstanding, while others should be placed on stands to sound their best. Some should be placed near a wall; others should be placed away from walls. We have provided a few tips on getting the best sound from your speakers (below), but you should also follow the guidelines on placement that the speaker manufacturer provided with your particular speakers to get the most out of them.

•Place the front left and right speakers at equal distances from the TV.

•When placing speakers near the TV, we recommend using magnetically shielded speakers to prevent possible interference, such as discoloration of the picture when the TV is switched on. If you do not have magnetically shielded speakers and notice discoloration of the TV picture, move the speakers farther away from the TV.

•Place the center speaker above or below the TV so that the sound of the center channel is localized at the TV screen.

If you choose to install the center speaker on top of the TV, be sure to secure it with putty, or by other suitable means, to reduce the risk of damage or injury resulting from the speaker falling from the TV in the event of external shocks such as earthquakes.

•If possible, place the surround speakers slightly above ear level.

•Try not to place the surround speakers further away from the listening position than the front and center speakers. Doing so can weaken the surround sound effect.

•To achieve the best possible surround sound, install your speakers as shown below. Be sure all speakers are installed securely to prevent accidents and improve sound quality.

Overhead view of speaker set up

 

 

Front

Center

Front

 

 

Left

Right

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Subwoofer

Surround

 

 

 

Surround

Left

 

 

 

Right

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Listening Position

3-D view of speaker set up

17

En

Page 16 Page 18
Image 17
Page 16 Page 18
Contents VSX-D411VSX-D511 Important Notice Page Contents Operating range of remote control unit Installing the receiverBefore you start Checking what’s in the box Making cable connections02 5 minute guide Introduction to home theater Hook up your TV Minute guide Listening to Surround SoundHook up your DVD player Connect your speakers 02 5 minute guideMinute guide Play a DVD, and adjust the volume to your liking1ch 0ch 02 5 minute guide Using the Quick Setup1ch Press EnterAudio/Video cords Connecting upDigital audio cords/Optical cables Video cables VSX-D511 onlyConnecting audio components Connecting up Connecting digital componentsConnecting video components Connecting up Connecting DVD 5.1 channel componentsSignal Arrows indicateFM wire antenna Connecting antennasUsing external antennas Connecting up AM loop antennaAntenna snap connectors To improve FM receptionSnap shut the speaker terminal to secure Connecting the speakersSpeaker terminals Hints on speaker placement By connecting a control cord optional Connecting up AC outletOperating other Pioneer components Connected equipment should not exceed 100 W 0.8 a10 11 12 13 14 15 16 17 18 Controls and displays Front PanelControls and displays Master VolumeDisplay DTSATT PRO LogicDirect MidnightReceiver Controls and displays Remote ControlDVD Subtitle TOP MenuAudio Stereo/Direct Playing sources Introduction to Sound ModesStandard modes Advanced Surround modesUsing Stereo/Direct Choosing the input signalPlaying sources ExpandedUsing Loudness and Midnight listening Using Advanced SurroundPlaying sources Listening to multi-channel playback Pro Logic Music Pro Logic II MoviePlaying other sources Using the tone controlsMidnight Off Loudness TrebleSelect DVD/LD if it is not already selected Press Signal Select front panel repeatedly to select 5.1 chPlaying sources Selecting the multi-channel analog inputs Choosing your receiver setup Setting up the receiverSpeaker setting Subwoofer settingSubwoofer setting Speaker settingCrossover frequency setting FL-C -SSFront speaker distance setting LFE attenuator settingCenter speaker distance setting Surround speaker distance set- tingDual mono setting Dynamic range control settingCoaxial digital input setting Optical digital input settingUse Level +/- to adjust the speaker levels in turn Setting the relative volume level of each channelWhen you’re done, press Test Tone to turn off the test tone Press Standard Press Test Tone to output the test toneImproving FM stereo sound Using the tuner Listening to the radioDisplay shows ST. MEMORY, then a blinking memory class Using the tuner Saving station presetsTune to a station you want to memo Rize Listening to station presets Using the tuner Naming station presetsChoose the station preset you want to name Press Station +/- to select the station preset you wantMonitoring your recording Making Recordings Making an audio or a video recordingAdjust the Master Volume Additional information TroubleshootingPlace the antenna farther away from the equipment causing ReceiverFront panel refer to Additional informationRemove the obstacle or operate from another position LightAmplifier Section Additional information SpecificationsVideo Section FM Tuner SectionDimensions Power Consumption 260 W16-9/16 W x 6-4/16 H x 15-8/16 D 19.8 lbAdditional information Additional information TNGZF/01L00001 Printed XRB3011-A 0 4 2 1 1 4 0

VSX-D411 specifications

The Pioneer VSX-D411 is a versatile home theater receiver that has been designed to deliver high-quality sound and an immersive audio experience for home entertainment enthusiasts. With a sleek, compact design, it fits seamlessly into any audio setup while providing a variety of features that enhance both audio performance and user convenience.

One of the standout features of the VSX-D411 is its powerful amplification system. With a 5.1 channel output, it delivers robust audio performance across multiple speakers, capable of producing up to 100 watts per channel. This ensures clear and dynamic sound, whether you’re watching your favorite movies, listening to music, or gaming. The receiver also supports various surround sound formats, including Dolby Digital and DTS, creating an enveloping soundstage that draws you into the action.

The VSX-D411 includes multiple input options, allowing for versatile connectivity with various devices. It offers several composite inputs, S-video inputs, and digital audio inputs, making it easy to connect DVD players, Blu-ray players, gaming consoles, and more. The receiver also features an integrated AM/FM tuner, providing access to a wide range of radio stations.

Another notable technology incorporated into the VSX-D411 is the Advanced Surround mode. This feature allows users to customize their audio experience with various sound modes tailored to specific content types, such as movies, music, and games. The receiver automatically optimizes sound settings to match the content being played, ensuring an enhanced listening experience each time.

The Pioneer's Multi-Channel Acoustic Calibration System (MCACC) is an outstanding characteristic that ensures optimal speaker placement and performance. MCACC analyzes the acoustic environment and adjusts the receiver’s sound output to compensate for any anomalies, allowing for a more balanced sound profile throughout the listening area.

User-friendly operation is another key hallmark of the VSX-D411. It features an intuitive remote control for easy navigation of settings and functions. The on-screen display provides clear visual feedback, making setup and configuration straightforward even for those less familiar with home theater systems.

Overall, the Pioneer VSX-D411 stands out as a reliable and feature-rich option for home audio setups. Its combination of powerful amplification, versatile connectivity, advanced sound processing technologies, and user-friendly design makes it an excellent choice for anyone looking to enhance their home entertainment experience.
Top Page Image Contents