05Playing sources
Listening to multi-channel playback
INPUT SELECTOR
RECEIVER DVD/LD TV/SAT CD
DVR
STANDARD
1Switch on the playback component.
2Switch on the receiver.
3Select the source you want to playback. Use the INPUT SELECTOR buttons on the remote (or the MULTI JOG/INPUT SELECTOR dial on the front panel).
4Press STANDARD.
For
For a two channel source, you can press STANDARD repeatedly to select the Pro Logic II mode you want:
Pro Logic
Pro Logic II
Music
Pro Logic II Movie
Refer to page 24 for more details about each mode.
5Start playback of the component you selected in step 1.
26
En
Using Advanced Surround
Dolby Pro Logic, Dolby Digital and DTS signal processing is done automatically correspond- ing to the input signal.
•Press ADVANCED SURROUND repeat- edly to cycle the sound options.
Each press changes the display as follows:
Movie Music
Virtual SB*
5-Stereo Expanded
*VSX-D511 only.
Refer to page 24 for more details about each surround effect.
•The Movie, Music, and Expanded effects of Dolby/DTS can be adjusted in the range of 10 to 90 (the default setting is 70) by pressing EFFECT
Using Loudness and Midnight listening
The Loudness listening feature can be used to get good bass and treble from music sources at low volume levels.
The Midnight listening feature allows you to hear effective surround sound of movies at low volume levels. The effect automatically adjusts according to the volume at which you’re listening.