Behringer BX4410A manual Specifications, Loudspeaker connections

Page 9

ULTRABASS BX4410/BX4410A

+Please ensure that only qualified personnel install and operate the BX4410/BX4410A. During installation and operation the user must have sufficient electrical contact to earth. Electrostatic charges might affect the operation of the unit.

6.2.1 Loudspeaker connections

In total, your BX4410/BX4410A features three loudspeaker connectors.

+When connecting loudspeakers to the 1/4" jack connectors, please switch off the device first. Power up the unit again after all connections have been made.

Please use a speaker compatible to Neutrik® Speakon® if you want to connect one speaker cabinet only. For optimum output power delivered to the speaker(s), use your BX4410/BX4410A in combination with one 4 W or two 8 W cabinets.

Your BX4410/BX4410A is equipped with high-quality connectors compatible to Neutrik® Speakon®, which ensure safe and trouble-free operation. These connectors were especially developed for high-power loudspeakers. Once it is plugged in, it safely locks into its position and cannot be accidentaly disengaged. It prevents the occurrence of electrical shock and ensures the correct polarity.

Fig. 6.4: Professional connector compatible to

Neutrik® Speakon®

7. SPECIFICATIONS

AUDIO INPUTS

 

Active instrument input

1/4" TS connector, unbalanced

Input impedance

approx. 220 kW unbalanced

Passive instrument input

1/4" TS connector, unbalanced

Input impedance

approx. 730 kW unbalanced

Return

1/4" TS connector, unbalanced

Input impedance

approx. 15 kW unbalanced

AUDIO OUTPUTS

 

Send/Tuner

1/4" TS connector, unbalanced

Output impedance

min. 2 kW unbalanced

Line Out

1/4" TS connector, unbalanced

Output impedance

approx. 100 W unbalanced

Output level

max. +20 dBu

D.I. output

XLR connector, servo-balanced

Output impedance

approx. 100 W balanced

Output level

max. 0 dBu

Loudspeaker connectors

1/4" TS connector, unbalanced

 

professional connector

 

(compatible to Neutrik® Speakon®)

Load impedance

min. 4 W

SYSTEM SPECIFICATIONS

450 Watts into 4 W

Power amp output

SPEAKERS

 

High-power bass speakers

4 x 10" BUGERATM Hard Attack

 

Aluminum cone speakers

 

(BX4410A)

 

4 x 10" BUGERATM Classic Tone

 

bass speakers (BX4410)

Sensitivity

94 dB @ 1 W / 1 m

SPL

max. 119 dB

Impedance

8 W

Frequency response

46 Hz - 16 kHz

Power (program)

300 W

Tweeter

1" tweeter driver

Frequency response

5 kHz - 16 kHz

POWER SUPPLY

 

Mains voltages

U.S./Canada

 

120 V~, 60 Hz, 6 A

 

China/Korea

 

220 V~, 50 Hz, 3 A

 

Europe/U.K./Australia

 

230 V~, 50 Hz, 3 A

 

Japan

 

100 V~, 50 - 60 Hz, 6 A

 

General export model

 

120/230 V~, 50 - 60 Hz

Fuse

100 - 120 V~: T 10 A H 250 V

 

220 - 240 V~: T 6.3 A H 250 V

Mains connection

Standard IEC receptacle

PHYSICAL/WEIGHT

 

Dimensions (H x W x D)

approx. 33" (840 mm)

 

x 26 3/4" (680 mm)

 

x 16 1/3" (415 mm)

Weight

approx. 60.5 kg (133.4 lbs)

BEHRINGER constantly strives to maintain the highest quality standards. Modifi- cations may be made, if necessary, without prior notice. The specifications and appearance of the equipment may therefore differ from those listed or illustrated.

7. SPECIFICATIONS

9

Image 9
Contents Version 1.1 June Ultrabass BX4410/BX4410ADetailed Safety Instructions Important Safety InstructionsForeword Table of ContentsIntroduction Design conceptBefore you get started Control Elements Front panelOnline registration Rear panel Wiring ExamplesSetup for master/slave operation Connecting several loudspeakersConnection of a multi-effects processor Ultrabass BX4410/BX4410A as masterShape Function InstallationUltrabass Function Mains connectionLoudspeaker connections SpecificationsWarranty