Precautions and Care of Your OHCM-200, Features

PRECAUTIONS AND CARE OF YOUR OHCM-200

•The microphone should never be dropped or subjected to extreme shock. Store only in a pad- ded case to protect it during transport.

•Keep the microphone away from extremely high temperatures (above 140°F or 60°C) and humidity. Avoid leaving the microphone in direct sunlight for long periods of time.

•When using the microphone outdoors, avoid getting it wet.

•After use in a high-moisture application such as a stage performance, wipe off the micro- phone with a dry cloth and permit it to air dry. Do not store the unit in a closed space (e.g., a plastic bag) until all moisture has evaporated.

FEATURES

•Extended smooth, ﬂat frequency response, and ultra sensitivity and high SPL capacity for clearest audio performance in any application — from miking choral groups to stage perfor- mances

•Low-mass back electret condenser element for most accurate, detailed audio

•Cardioid pattern for frontal audio pickup without feedback and unwanted side and rear ﬁll

•Permanently attached 20’ (6.1M) cable with convenient integrated power module/XLR (M) connector

•Rugged construction for optimum reliability. Integrated hanging wire for ease of mounting in any use

•Conveniently powered by external 9~52 phantom power, no batteries required

FREQUENCY RESPONSE

-30 -40 -50

-60 (dBV/Pa)

-70

20 (Hz)	50	100	200	500	1K	2K	5K	20K
SPECIFICATIONS
Microphone Type							........Back electret condenser
Polar Pattern							......................	Uni-directional
Output Connector								XLR
Frequency Response							50Hz to 16kHz, +/- 3dB
Sensitivity					.........	-37dB,+/-3dB (0dB=1V/Pa @ 1kHz)
Output Impedance							200ohms +/-30% (@ 1kHz)
Operating Voltage								9-52VDC
Dimensions (Microphone only)					0.50” Dia. x 1.5” length (1.3 cm x 3.8 cm)
Weight (Microphone only)		..........................................................................................						0.7 oz (20g)

SERVICE

(U.S.) Should your Nady OHCM-200 Overhead Hanging Condenser Microphone require ser- vice, please contact the Nady Customer Service Department via telephone: (510) 652-2411 or e-mail: service@nady.com.

(INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer from whom you purchased this product. The warranty card supplied with this system provides valuable warranty and service information. Store it in a safe place for future reference. Do not attempt to service this unit yourself as it will void your warranty.

NADY SYSTEMS, Inc.

6701 Shellmound Street • Emeryville, CA 94608

Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com