Nady Systems ENCORE1HTSYSN, NADYENCORE1LTOB manual Encore I Receiver, Rackmounting the Receiver

Page 4

ENCORE I RECEIVER

1. Rackmounting the Receiver

There are two options available for rackmounting the Encore I receiver: singly or side-by-side with another Encore Series receiver.

a.Single mounting: Remove the receiver SIDE MOUNT CLIP (1) from each side of the receiver (as shown) and slide in the optional ERM-12 RACK EARS (9).

b.Side-by-side double mounting: After removing the SIDE MOUNT CLIPS (1) from both Encore receivers, join the two receivers with the EJC-2 JOINING CLIP (10) and attach the ERM-22 RACK EARS (12) as shown.

(Note: Do not mount the receiver in a rack directly above an amplifier or other source of high heat — this could degrade the performance of the Encore I. Always ensure adequate airflow and heat dissipation in any rack configuration.)

2.Powering the Receiver

Plug the 12V AC/DC ADAPTER (15) provided into the DC INPUT JACK (11) on the back of the receiver. Then plug the power supply into an AC outlet. (Note: Any 12V DC source with 400mA capability can also be used.)

Press the POWER SWITCH (8) once to turn on the receiver. The POWER ON LED (7) will now light and the receiver is operational.

3. Antenna

The Encore I receiver is supplied with a TELESCOPIC ANTENNA (16). This should be extended fully to obtain maximum range. Optimal antenna position is vertical. For maximum range, it is always best to maintain a line of sight (no obstructions) between the receiver antenna and the transmitter at all times whenever possible.

4. Mute (Squelch) Adjustment

In normal operation, the MUTE CONTROL (2) should be set fully counterclockwise to the factory preset minimum RF level. However, in areas of high RF activity, the mute (or squelch, as it is sometimes called) may need to be adjusted to compensate for the adverse conditions in a particular location. If, with the transmitter off, one or more LEDs of the 5 LED RF LEVEL DISPLAY (4) flicker or stay on, the squelch control should be turned clockwise until the LEDs extinguish. When the squelch is properly adjusted, the RF LEVEL LED displays will only light when the system transmitter is turned on. Turning the squelch control too far clockwise will reduce the range, but yield a quieter mute (squelch) function. When the 5 LED RF LEVEL display extinguishes, the transmitter is out of range for that given location, and the user should move closer to the receiver to re-establish the radio link.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents VHF Wireless Microphone System Using this Manual ContentsIntroduction System Features WHT Handheld MIC TransmitterEncore I Receiver Rackmounting the ReceiverInstrument Connection using the WGT instrument transmitter Unbalanced OUT Volume WHT Handheld Microphone Transmitter Page Page Opening Battery Compartment WGT Instrument Bodypack Transmitter Opening Battery Compartment Specifications Operating RangeService Information ONE-YEAR Limited Warranty This warranty is subject to the following conditions

ENCORE1HTSYSN, ENCORE1HTSYSG1, ENCORE1LTOB, ENCORE1LTOE, ENCORE1HTSYSD specifications

Nady Systems has a reputation for innovative solutions in the field of wireless audio technology, and its ENCORE series embodies this commitment to quality and performance. Among the standout offerings are models ENCORE1LTON, ENCORE1LTOG1, ENCORE1HTSYSE, ENCORE1LTOF, and ENCORE1LTOD. These models cater to various needs, making them suitable for musicians, performers, and audio professionals seeking reliable wireless systems.

The ENCORE1LTON is designed for clear vocal reproduction, featuring a handheld transmitter and a compact receiver that operate on UHF frequency bands. It provides a flexible 100 selectable channels, ensuring interference-free operation. The built-in frequency scanning capability automatically detects the best available frequencies within the operating range. Additionally, the rapid setup and user-friendly interface make it accessible for both novice and seasoned users.

ENCORE1LTOG1 operates similarly, but it includes a guitar transmitter, making it perfect for electric guitarists seeking freedom of movement on stage. The low-latency design offers real-time audio transmission, which is essential for a seamless performance. This model also benefits from superior battery life, delivering up to eight hours of continuous use on a single charge.

The ENCORE1HTSYSE model is an all-in-one solution that combines both handheld and bodypack transmitters. This versatility allows performers to switch effortlessly between different vocal styles or instruments. Its robust construction and advanced technology ensure reliability even in rugged performance environments, making it a solid choice for touring musicians.

For musicians who require a dedicated microphone setup, the ENCORE1LTOF features a specialized handheld microphone optimized for vocal clarity. This model incorporates advanced compression and expansion circuits to minimize feedback and enhance audio quality. Moreover, it includes a waste-free charging system, which is both eco-friendly and efficient.

Finally, the ENCORE1LTOD is tailored for more extensive systems, allowing for multi-channel operation. This model excels in larger venues, where multiple performers may need to operate simultaneously without interference. It includes a rack-mountable receiver, which simplifies integration into existing sound systems.

In summary, the Nady Systems ENCORE series, including models ENCORE1LTON, ENCORE1LTOG1, ENCORE1HTSYSE, ENCORE1LTOF, and ENCORE1LTOD, showcases cutting-edge technologies in wireless audio transmission. From versatile setups for performers to dedicated solutions for specific applications, these models cater to a wide range of audio needs while maintaining high standards of performance and reliability.
Top Page Image Contents