WGT Bodypack Transmitter

1.Snap open the BATTERY COMPARTMENT (7) and insert a fresh 9V BATTERY (8), observing the correct polarity. Close the compartment. The WGT is provided with a 3.5 mm LOCKING JACK (9) for connecting the INSTRUMENT CABLE (10). To secure the connection, turn the metal slip ring on the plug clockwise to thread it on to the jack. To unplug, reverse the process. Slip the transmitter into a pocket or clip on to your clothes or instrument strap.

(Note: As the cord to the instrument also serves as the antenna, be sure to extend it fully for maximum range. Rolling up or shortening the cord may reduce the effective operating range.)

2.Turn on the WGT by sliding the OFF/ STANDBY/ON SWITCH (11) to the Standby position (transmitter on, audio muted) or the On position (transmitter and audio both on). The BATTERY INDICATOR LED (12) will give a single quick flash, indicating usable battery strength. In the case of a dead or low battery, the LED either will not go on at all or will stay on continuously, indicating that the battery should be replaced with a fresh one.

3.The WGT transmitter is now ready to use. Adjust the volume of the receiver as per the previous Receiver Operation section. For optimum performance, an INPUT LEVEL

CONTROL (13) is provided on the top panel of the WGT. Adjust the gain by turning the control with a small slot head screwdriver. It is recommended that this control be turned to maximum gain. However, for ultra high-gain instrument sources such as active bass pickups or even extra hot guitar pickups, turning the level down slightly will create a cleaner sound.

(Note: Turning down the input gain too much can compromise the signal-to-noise ratio and is not recommended. Set for the maximum possible gain and headroom without noticeable distortion on the high level peaks).

(Note: Scratchy noises can sometimes occur when some electric guitars/basses with dirty pots or connections are used with any wireless system. For this reason, the supplied INSTRUMENT CORD

(10)has a factory installed capacitor inside the ¼” plug. This capacitor provides first order filtering of the RF signal from the cord into the guitar and eliminates virtually all scratchy noises. Should your equipment still give you scratchy noises, we suggest these steps to eliminate them:

1)Make sure all guitar volume and tone pots are clean and all contacts are solid— this is very important.

2)Provide extra filtering with a 220 pF capacitor soldered across the hot to ground terminals of the guitar’s volume and tone pots.)

DKW, DKW3GTB, DKW3GTD, DKW3GTR, DKW3GTP specifications

Nady Systems has established itself as a prominent player in the wireless audio market, with a range of versatile and innovative products. Among their notable offerings is the DKW series, which includes models such as the DKW3GTP, DKW3GTR, DKW3GTD, and DKW3GTB. Each of these models showcases advanced technology and features designed to cater to both amateur and professional audio needs.

The DKW3GTP is a handheld transmitter that provides exceptional sound quality and reliable performance. It features a cardioid microphone that effectively isolates the sound source while minimizing background noise, making it ideal for live performances and presentations. The model operates in the UHF frequency range, which helps to reduce interference and improve audio clarity.

Next in line, the DKW3GTR is a belt pack transmitter designed for use with lavalier microphones. Its compact and lightweight design ensures maximum mobility without compromising audio quality. The DKW3GTR utilizes a durable clip for secure attachment to clothing, making it perfect for interview settings, theater productions, and public speaking events. Additionally, the unit offers adjustable gain control, allowing users to easily fine-tune their audio levels.

For users looking for a more comprehensive solution, the DKW3GTD model comes equipped with both a handheld and lavalier microphone, offering versatility in various applications. This dual-microphone setup is perfect for those who may need to switch between different audio sources seamlessly, without the hassle of setting up additional equipment.

Completing the lineup, the DKW3GTB is a true diversity receiver that enhances connectivity and signal robustness. Equipped with an array of advanced features, such as an easy-to-read LCD display, it provides users with real-time information about battery levels, signal strength, and frequency selection. The true diversity technology minimizes dropouts and audio cuts by employing two antennas, ensuring a stable connection.

Across the entire DKW series, the transmitters and receivers are designed with user-friendliness in mind. They feature easy setup processes and intuitive controls, making them accessible to users of all skill levels. Furthermore, the systems boast impressive battery life and quick recharge capabilities, allowing for extended periods of uninterrupted use.

In summary, the Nady Systems DKW series, encompassing the DKW3GTP, DKW3GTR, DKW3GTD, and DKW3GTB, represents a commitment to quality, durability, and innovative wireless audio technology. Whether for live performances, presentations, or broadcast applications, these models provide the performance and reliability that users can depend on.