Nady Systems 2W1KULTO, 2W1KUHT owner manual Quick User Controls Guide, 2W-1KU Receiver Front View

Quick User Controls Guide

2W-1KU Receiver: Front View

1 3 4

RECEIVER 1

GROUP CHANNEL VOL

2W-1KU DUAL

2

5

True Diversity

7

4 3 1 6

RECEIVER 2

GROUP CHANNEL VOL

2

12

GROUP CHANNEL VOL 13

8 9 10 11

1.IR Infrared LED transmitter window for linking the RX to the TX for frequency download

2.AUTO-SCAN / ASC (IR SYNC) BUTTON Long press (hold ~2 seconds) for AUTO-SCAN to locate a clear channel to use. Short press (~1 second) to make the IR link download the receiver’s selected frequency to the TX. To download, position the HT-1KU/BT-1KU transmitters’

IR Window (36/45) about 6-12” away from the RX IR Window (1). Press the ASC Button (2) once and wait one second for the RX to respond.

If the download is successful, the RX will show one of the Diversity Antenna Icons (8/13) and full RF LCD Bars (12) on the LCD Display (7).

3.SET BUTTON To scroll through the LCD menu and set the selected program/function

4. UP BUTTON To change the receiver LINE output VOL level, GRP/CH up by one step at a time

DOWN BUTTON To change the receiver LINE output VOL level, GRP/CH down by one step at a time

5.AF/PEAK LEDS Shows GREEN LEDs for normal audio and PEAK RED LED for maximum audio level allowable

6.POWER BUTTON Press for one second to turn both receivers ON-OFF

7.LCD DISPLAYS For indication of A-B Diversity, GRP (00-09)/CH (00-99), RF signal strength indicator 1-6 bars, and Volume Levels (0-63)

8.DIVERSITY A INDICATOR Indicates receiver A is active when transmitter is on

9.FREQUENCY GROUP Indicates selected GROUP from 00-09

10.FREQUENCY CHANNEL Indicates selected CHANNEL from 00-99

11.SUM VOLUME LEVEL Indicates selected LINE output level from 00-63, (63 is loudest output)

12.RF SIGNAL METER Indicates received signal strength level from 1-6 bars, (full 6 bars shows strongest incoming RF signal)

13.DIVERSITY B INDICATOR Indicates receiver B is active when transmitter is on

4