Nady Systems 2W1KUHT, 2W1KULTO owner manual BT-1KU Bodypack Transmitter LT, LT/HM or GT 5049

Page 7

Quick User Controls Guide

BT-1KU Bodypack Transmitter (LT, LT/HM or GT)

40 41

27

28

29

 

 

39

 

30

45

 

 

46

5049

42

43

44

47

48

39.LCD DISPLAY For indication of GRP (00-09)/ CH (00-99), AUDIO INPUT LEVEL (0dB to -30dB), and BATTERY status (5 bars to 1 bar and “BATT.” See 27/28/29/30 in HT-1KU transmitter diagram above for detail on LCD display indicators.

40.INPUT JACK 3.5mm locking mini jack for connecting audio input cord from lapel mic (LT), Headmic(LT/HM), or instrument (GT)

41.POWER OFF/MUTE/ON SWITCH Slide power switch to ON or OFF to turn ON-OFF, set to MUTE to turn power on with audio muted

42.ANTENNA Permanently attached antenna

43.UP BUTTON To change the GRP/CH or VOL level up by one step at a time or to light up the display

DOWN BUTTON To change the GRP/CH or VOL level down by one step at a time or to light up the display

44.SET BUTTON To scroll LCD menu and set the selected program/function

45.IR RECEPTOR SENSOR Infrared LED sensor for linking the TX to the RX during IR frequency download

46.RF POWER HI/LOW SWITCH To select power level setting for high or low output

47.BATTERY COMPARTMENT

48.LATCHING BATTERY COMPARTMENT DOOR

49.BELT CLIP (on back of unit)—removable clip can be set for top of transmitter pointing either up or down

50.Two AA alkaline batteries

7

Image 7
Contents 2W-1KU Using This Manual ContentsIntroduction 2W-1KU Receiver System FeaturesHT-1KU Handheld BT‑1KU Bodypack Transmitters 2W-1KU Receiver Front View Quick User Controls GuideAntenna Extension Cables Optional 2W-1KU Receiver Back View3637 HT-1KU Handheld TransmitterBT-1KU Bodypack Transmitter LT, LT/HM or GT 5049 Battery Compartment Latching Battery Compartment DoorButtons Function System OperationAUTO-SCAN / ASC IR Sync Button 2 has two functions Powering the Receivers Installing AntennasRack-mounting the Receiver Connecting the Audio Outputs Adjusting the SquelchProgramming the HT-1KU to the Selected Channel Setting up the TransmitterPowering the Transmitter On/Off Battery Batt Meter IconIR Sync Programming Operating the HT-1KU Handheld TransmitterConnecting Input Audio Source Programming the BT-1KU to the Selected Channel Instrument Use BT-1KU/GT only Operating the BT-1KU Bodypack TransmitterAF/PEAK LED Display SpecificationsNo or Low Audio FeedbackRF Interference Finding Open Channels This is very important Miscellaneous TipsFrequency Plan AccessoriesService Information FrequencyThis warranty is subject to the following conditions One Year Limited WarrantyHow To Obtain Service