Nady Systems 2W1KUHT, 2W1KULTO owner manual Accessories, Service Information, Frequency Plan

Page 19

Frequency

Frequency Plan

Band 1 (U.S.): 672.000-696.975MHz

Band 2 (International): 795.000-819.975MHz 25KHz per step (1000 Channels) U.S.

Accessories

Part Number

Description

IC-U1K

Instrument cable included for BT-1KU/GT transmitter,

 

3.5mm locking mini plug to ¼”

Service Information

In the U.S. If you are experiencing operational problems with your system, please refer to the Support page at www.nady.com for assistance. Should your wireless system require service, please contact the Nady Service Department at (510) 652-2411 for a Return Authorization (R/A) Number and service quote (if out of warranty). Make sure the R/A Number is clearly marked on the outside of the package that you are returning.

If your unit is out of warranty, please enclose a cashier’s check or money order (or pay by credit card) per instructions by the Nady Service Department. Ship your unit prepaid to: Nady Systems, Service Department, 6701 Shellmound Street, Emeryville, CA 94608. Include a brief description of the problem you are experiencing. For service of a unit under warranty, please follow the instructions in the following section.

Outside the U.S For service or warranty matters please contact the Nady distributor in your country through the dealer/store from which you purchased this product.

Do not attempt to service this unit yourself as

it can be dangerous and will also void the warranty.

19

Image 19
Contents 2W-1KU Using This Manual ContentsIntroduction 2W-1KU Receiver System FeaturesHT-1KU Handheld BT‑1KU Bodypack Transmitters 2W-1KU Receiver Front View Quick User Controls GuideAntenna Extension Cables Optional 2W-1KU Receiver Back View3637 HT-1KU Handheld TransmitterBT-1KU Bodypack Transmitter LT, LT/HM or GT 5049 Battery Compartment Latching Battery Compartment DoorButtons Function System OperationAUTO-SCAN / ASC IR Sync Button 2 has two functions Powering the Receivers Installing AntennasRack-mounting the Receiver Connecting the Audio Outputs Adjusting the SquelchProgramming the HT-1KU to the Selected Channel Setting up the TransmitterPowering the Transmitter On/Off Battery Batt Meter IconIR Sync Programming Operating the HT-1KU Handheld TransmitterConnecting Input Audio Source Programming the BT-1KU to the Selected Channel Instrument Use BT-1KU/GT only Operating the BT-1KU Bodypack TransmitterAF/PEAK LED Display SpecificationsNo or Low Audio FeedbackRF Interference Finding Open Channels This is very important Miscellaneous TipsFrequency Plan AccessoriesService Information FrequencyThis warranty is subject to the following conditions One Year Limited WarrantyHow To Obtain Service