PARTY | RM75 |
MIX |
3 | 4 | MAIN | pwr |
|
2 |
|
| CUE | SELECT |
1 |
|
| HEADPHONE |
|
| HDPHONE |
| LEVEL | |
| OUTPUT |
|
|
INPUTMONO
LEVELLEVELLEVEL LEVEL LEVEL LEVEL
MICROPHONE | 1 |
MICROPHONE | 2 |
PHANTOM POWER | two one | on on |
INSERT
FX
MIC
MAIN OUTPUTS
AC IN 12 VAC
75 -
MADE IN U.S.A.
RM75
MODEL
RM75 PARTY MIX
The new ROLLS RM75 is an ideal single rack space DJ/Karaoke mixer. The unit combines two microphones with four source inputs. Mic One has input jacks available on both the front and rear panel. +12 volts of phantom power is supplied for your favorite condenser microphones. A 1/4" TRS Mic Insert jack has been provided on the rear panel to add effects and processing to your mic signal. The four source inputs have individual level controls, and master Bass and Treble level controls.
The Headphone Output, Level control, and Cue Select switch are conve- niently located on the front panel for easy access.
FEATURES
•Two Mic Channels
•Tone controls for each Mic Channel
•Mic One offers front and rear panel Input jacks
•+12 VDC Phantom Power
•Mic Insert for effects processors
•Four RCA source inputs
•Bass and Treble controls for Source Inputs
•Balanced 1/4' TRS Outputs
•Unbalanced RCA Outputs
•External PS12 power supply (included) for low noise operation
SPECIFICATIONS |
|
|
Input Impedance: | Mic: | 600 Ohms XLR balanced |
| Source: | 22K Ohms RCA |
| Mic Insert: | 22K Ohms 1/4" TRS insert |
Max Input Level: | Mic: | |
| Source: | 24 dBV |
Headphone Output Impedance: |
| 8 Ohms |
In/Out Connectors: | 3: XLR, 5: Stereo RCA, 4: 1/4" TRS | |
Phantom Power: | +12 VDC |
|
Output Level: | +17 dBV max |
|
Output Impedance: | 51 Ohms |
|
Max Gain: | Mic: | 60 dB |
| Source: | 26 dB |
Tone Controls: | ||
| ||
Noise Floor: | - 80 dB, THD: <.025%, | |
S/N Ratio: | 96 dB |
|
Size: | 19" x 1.75" x 4" (48.3 x 4.5 x 10 cm) | |
Weight: | 5 lbs. (2.3 kg) |
|
ROLLS Coporation
5968 South 350 West, Salt Lake City, UT, 84107
(801)
info@rolls.com • www.rolls.com