❒101. Wow, it’s hard to believe we have come 100 steps already! Install C36, a 10uF electrolytic capacitor. Again check the orientation before continuing.
❒102. Install C34, a .1uF ceramic capacitor (marked .1 or 104).
❒103. Install C8, a .01uF ceramic capacitor (marked 103, 10n or .01).
❒104. Install C33, a 220uF electrolytic capacitor (orientation!)
❒105. Install C5, a .01uF ceramic capacitor (marked .01, 103 or 10n).
❒106. Install C6, a 10uF electrolytic capacitor. Orientation!
❒107. Install C3, a 220uF electrolytic capacitor. Again note orientation.
❒108. Install C2, a 10uF electrolytic capacitor. Orientation yet again!
❒109. Install C32, a .1uF ceramic capacitor (marked .1 or 104).
❒110. Install C31, a 220uF electrolytic capacitor. Again note orientation when installing.
❒111. Install C17, a 10uF electrolytic capacitor. Check orientation.
❒112. Install C35, a .1uF ceramic capacitor. (Marked .1 or 104).
❒113. Install C28, a .1uF ceramic capacitor. (Marked .1 or 104).
❒114. Install C14, a 10uF electrolytic capacitor. Orientation !
❒115. Install C18, a 10uF electrolytic capacitor. Again check installation direction for correct polarity.
❒116. Install C24, a 10uF electrolytic capacitor. Orientation !
❒117. Install C13, a .1uF ceramic capacitor (marked .1 or 104).
❒118. Install C12, another .1uF ceramic capacitor (marked .1 or 104).
Now we have finished installing all of the capacitors in the board. It would be a good time to take a break and give your eyeballs a rest. Go get a drink, eat something and come back with a new perspective on the kit. In that way we can check the board properly for solder bridges and possible cold solder joints with a better chance of finding them.
Now we will move on to the jacks on this side of the board.
❒119. Install J1, a 3.5mm stereo jack.
❒120. Install J3, a 3.5mm stereo jack.
❒121. Install J7, another 3.5mm stereo jack.
❒122. Install J4, yet another 3.5mm stereo jack.
❒123. Install J8, a 2.5mm power connecting jack.
❒124. Install J2, a 3.5mm stereo jack.