Delivery includes, Attaching the microphone boom

Delivery includes

yBoom microphone

yNeckband

yNeckband connecting cable

yPlastic transport case, foam-lined with cut-outs

yInstructions for use

yWarranty Certificate

Attaching the microphone boom

The neckband has two holders which are designed so that the microphone booms can be worn on either side of the mouth.

To change the microphone boom, carefully lever it out of the holder. To reattach the microphone boom, press it into

the holder until it snaps in. The upper round recess is for the

HSP 2 (∅ 1.1 mm). The lower square recess at the front keeps the HSP 4 in a fixed, non-rotating position, thus ensuring that the sound inlet is reliably directed towards the mouth.

To benefit for a long time from the reliable and firm guidance through the holder you should not turn the microphone boom in the recess. Always carefully lever it out of the holder and then let it snap in again.

Note:

In order to ensure the adjustability of the angle of the microphone boom, maintain a minimum distance of 1 – 2 cm between the holder and the cable connection.