Painting IN-CEILING Grilles

Painting in-ceiling grilles

The LCi-RTS100 is supplied with two grilles,

one perforated aluminum, the other cloth-covered plastic. The perforated aluminum grille may be painted, while you may dye the cloth grille.

Required tools:

1.Paint of your choice (grilles must be spray painted).

2.A paperclip or corkscrew (for removing the paintable grille).

3.Masking tape

4.Paint mask (supplied; covers un-paintable parts)

Preparation:

1.Separate the parts of the speaker. If the speaker is not yet installed, the grille can be removed simply by pushing the clamp screws forward

to push the grille off the speaker from the inside.

2.Remove the cloth scrim from the inside of the grill.

3.When painting the speaker frame, use the supplied paint masks to carefully mask off the front of the speakers to protect the drivers and baffles. You can do this while the speaker is already installed in the ceiling (if, for instance, you’re repainting the room). If you do not have the paint masks, carefully mask the speaker components using paper and masking tape. Use a paper clip to remove the grille.

Painting the aluminum mesh grille:

The grille of the LCi-RTS Series speaker features an even, protective paint. This paint is an ideal primer.

1.Paint the grille.

Note: Grilles must be spray painted. Do not use a brush and paint. Thick, brushed paint may clog the grille holes. Use thin coats of spray paint.

If you’re using a compressor and spray gun, use the finest, most diffused setting. Be careful not to fill the holes in the grille with paint.

2.When the paint is completely dry, carefully reinstall the grille by fitting it into its recess so that it is just resting on the frame. Starting with one corner, go around the speaker and push the grille into the grille notch a little bit at a time. Be gentle; the grille may be easily bent by rough handling. You will feel a positive “snap” when the grille is fully in place.

Painting the frame:

1.Apply paint to exposed (unmasked) parts. Use two or more thin coats.

2.When the paint is completely dry, remove the masking material.

Important note:

The RTS100 comes with an eye-bolt, which must be installed before locating the speaker in a ceiling. Use an appropriate length and weight of wire when installing an RTS100 in a ceiling.

For mor e infor mation visit our website at www. polkaudio . com

LCi-RTS100 specifications

The Polk Audio LCi-RTS100 is a remarkable addition to any home audio system, designed to deliver superior sound quality and clarity. Known for its innovative engineering and stylish aesthetics, this speaker is part of Polk's LCi (Low Center of Gravity) series, which combines advanced technology with practical design features.

One of the key features of the LCi-RTS100 is its unique design, which allows for flexible placement in a variety of environments. Its low-profile silhouette makes it an excellent choice for wall-mounted applications or as part of a home theater setup. The speaker's elegant design seamlessly blends into any interior decor, offering both functionality and style.

The LCi-RTS100 utilizes advanced driver technology, featuring a 5.25-inch Dynamic Balance midrange driver that provides accurate and detailed reproduction of vocals and instrumentals. This driver is engineered to minimize distortion, ensuring that every note is delivered with precision. Additionally, the speaker is equipped with a 1-inch silk dome tweeter that enhances high-frequency response, delivering a smooth and open sound stage.

Polk Audio has incorporated several proprietary technologies into the LCi-RTS100 to further enhance its performance. The speaker features the patented PowerPort bass venting system, which optimizes low-end response. This technology allows for deeper bass output without distortion, making it ideal for both music and movie soundtracks. The front-firing design of the PowerPort also allows for greater placement flexibility since it requires less clearance from a wall compared to traditional rear-ported designs.

Installation is another area where the LCi-RTS100 excels. It comes with a simple mounting system that allows for quick and easy setup. The included mounting hardware ensures a secure fit, while the speaker's integrated keyhole slot provides additional mounting options.

In terms of compatibility, the LCi-RTS100 is designed to work well with a variety of audio systems, making it an excellent choice for those looking to enhance their existing setup. Whether used in a stereo configuration or as part of a surround sound system, the speaker performs admirably, delivering an immersive listening experience.

In conclusion, the Polk Audio LCi-RTS100 is a well-rounded speaker that combines advanced technology with design versatility. Its high-quality components, innovative features, and sleek appearance make it an appealing option for audiophiles and casual listeners alike. With its ability to produce clear sound across a wide frequency range, the LCi-RTS100 is a testament to Polk Audio's commitment to quality and performance in home audio.